User Manual

www.PyleUSA.com
5
Monitor Stand Mounting
PLCMTR - Commercial Grade Camera System
1. Set the mount stand in the desired location, then use screws to secure the mount stand
into location. Please make sure as to set a location free from vehicle obstruction
including any wiring, or location where it may obstruct the driver's view, driving
conditions, etc.
2. Attach the metal buckle piece on top of the fan shaped mount stand, and slide it into
the receiving slot in back of the display monitor assembly. This metal buckle should slide
in and up to the monitor assembly.
3. Set the desired position/height of the buckle into the monitor assembly.
4. Tighten the clamp-style knob in the back of the stand mount to secure the monitor in the
desired position.
5. The angle / tilt position of the stand mount is also adjustable. Located toward the base
of the stand mount is another clamp-style knob.
*Be sure to mount the video monitor from speakers or other devices which may distort
the output display. Keep the monitor away from the speaker's or other device's
magnetic field.
*Install the monitor on a surface that can bear the capacity of over 9 lbs.
*Don't install the monitor in the line of ventilation areas (keep away from extreme hot
and extreme cold temperatures). *The monitor is not waterproof, avoid exposure to
excess liquids or harsh cleaning chemicals/detergents.
*Holes in the back of the display monitor serve as ventilation ducts. To ensure operation
of the unit, and protect from overheating, these holes must not be blocked, to reduce
risk of electric shock or fire.