PLCMTR92 Commercial Grade Safety Camera & Video System USER MANUAL
PLCMTR - Commercial Grade Camera System Please read instructions carefully before installation and use. Installation should be performed by a professional installer. To ensure your safety, the driver should not watch videos or operate features on the monitor while driving. There are no serviceable parts in this unit, do not disassemble or try to repair this unit. If the unit malfunctions please return to your vendor or send to a Pyle repair facility.
PLCMTR - Commercial Grade Camera System Camera Wiring & Connection (4-Pin Connection) Display Monitor Video Connectors POWER: DC 12V GND Power &Video Wiring Harness Red: Power 12/24V Black: GND Green: +12V Reverse +12V Reverse *When the Green - Reverse Trigger - is connected, the system will automatically revert to this connection once the vehicle is placed into reverse gear. This is connected to the camera via 4-Pin connection.
PLCMTR - Commercial Grade Camera System The video monitor is provides power and camera video signals via the video and power wiring harness. From the monitor, you will be able to control Ch. 1, Ch. 2, input video cameras (V1, V2,). The power and video wiring harness includes an RCA (video) connector for you to install an additional video input source. Monitor Controls 1. Video input selection 2. Menu 3. Power on/off 4. Analog variable decrease 5.
PLCMTR - Commercial Grade Camera System 1. Set the mount stand in the desired location, then use screws to secure the mount stand into location. Please make sure as to set a location free from vehicle obstruction including any wiring, or location where it may obstruct the driver's view, driving conditions, etc. 2. Attach the metal buckle piece on top of the fan shaped mount stand, and slide it into the receiving slot in back of the display monitor assembly.
