User Manual
www.PyleUSA.com
10
TURNING THE DEVICE ON AND OFF
Press and hold the ON/OFF button for a few seconds to turn
on the device. A welcome message will be displayed on
screen as shown in the image below.
To turn o the device, again press and hold the ON/OFF
button for a few seconds. A goodbye message will be
displayed on screen as shown in the image below.
Note:
The Dashboard Camera will switch on and o automatically if
you keep it permanently connected to the car charger.
VIDEO SETTINGS
Resolution
Recommend setting: 1080FHD
Use the following procedure to set the recording resolution:
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the
"Resolution" option
3. Press OK to view available resolutions: 1080FD/1920x1080,
720P/1280x720, etc.
4. Press the UP or DOWN button to make your selection
5. Press OK to conrm your entry
6. Press MENU to exit Video Settings
7. Press OK to start recording
8. Press OK again to stop recording