User Manual

www.PyleUSA.com
14
DATE STAMP
You have the option to display the date and time in your
videos. Note that the date and time stamp cannot be
removed from videos if this feature was enabled at the time
of recording.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Date
Stamp" option
3. Press OK to view the current ON/OFF status for this feature
4. Press the UP or DOWN button to enable or disable this
feature
5. Press OK to conrm your entry
6. Press MENU to exit Video Settings
PLATE NUMBER
Enable this feature to enter your vehicle plate number for
video recording. The plate number will stamp in the video.
1. Press MENU once to enter Video Settings
2. Press the UP or DOWN button to navigate to the "Plate
Number" option
3. Press OK to view the current ON/OFF status for this feature
4. Press the UP or DOWN button and OK to enable or disable
this feature
5. If "ON" is selected, enter the plate number on the next
pop-up screen using the UP and DOWN buttons; press OK
to next digit
6. Press MENU to exit Video Settings