User Manual
www.PyleUSA.com
9
REMOVING THE MEMORY CARD
Before removing memory card from your unit, you must rst
remove the unit from the mount.
Before removing a memory card from your device:
1. Press the REC button to stop the device from recording
2. Press and hold the ON/OFF button to switch o the device
3. Gently push the memory card in and let go until it unlocks
Do not remove the memory card while the device is
transferring or accessing information. Doing so can result in
data loss or corruption, or damage to the memory card or
device. The manufacturer is not responsible for losses that
result from the use of damaged memory cards, including the
loss of data.
Remember to wait for the “safe to remove hardware” message
before removing your memory card from your computer.
Removing the memory card without properly ejecting may
result in damage to the memory card or the data saved on it.
FORMATTING THE MEMORY CARD
You may choose to format your memory card with either the
device or a computer.
To use the device for formatting a memory card:
1. Press the REC button to stop the device from recording
2. Press the MENU button twice to enter System Settings
3. Press the DOWN button to navigate to the "Format" option
4. Press OK to conrm your selection
5. Press the UP button once
6. Press OK when the word YES is highlighted in blue
Before formatting a memory card, always remember to make
backup copies of all important data stored on the device. The
manufacturer’s warranty does not cover loss of data resulting
from user actions.