PLDVRCAM74 Dual DVR Dash Cam System Full HD 1080p Vehicle Dash Camera Video Recording with Waterproof Backup Cam
To ensure correct operation and avoid damage, please read this user manual carefully before using this product. GETTING STARTED Device Layout 2 www.PyleUSA.
NO Button 1 Power Functions Press and hold in 3 seconds to power ON/OFF Press to turn ON/OFF the Screen Press on MENU to enter menu at standby mode. Press UP and DOWN to select options and confirm with OK. After finishing, press MENU to exit 2 Menu 3 Emergency Lock / OK Press to save and lock present video in recording mode 4 REC/UP 5 MIC / DOWN / MODE Press to select upwards. Start or stop recording when you press buttondownwards. in the mode of recording.
Status Icons Icon Meaning Video Resolution Wide Dynamic Range Charging via USB Charger Battery Power Level Microphone Mute Microphone On Video Recording Mode Video Playback Mode Photo Mode Loop Recording Memory Card Inserted G- Sensor Sensitivity White Balance License plate number 4 www.PyleUSA.
INSTALLATION 1. Format the micro sd memory card. (The sd memory card must be formated before use) 2. Insert the micro sd memory card in the SD slot. (Put the card in the right direction and must power off the camera) 3. Installation The first step The second step Third: Adjust the front lens for optimum viewing angle after you fix the camera to the car mirror. FIX CAR CHARGER ( POWER) www.PyleUSA.
FIX - REAR VIEW CAMERA Rear View Camera Photo Express: Insert into the camera body Connect the back lens Connect the Red line anode of the back lamp Connect the black wire e cathode of the back lamp Rear view camera mounting line reference Install the camera body Install the rear view camera Install the rear view lens TURN ON OFF THE CAMERA Turn ON: Press the power button/Start your car's engine, the camera will turn ON.
VIDEO SETTINGS Resolution Recommend setting: 1080FHD Use the following procedure to set the recording resolution: 1. Press MENU once to enter Video Settings 2. Press the UP or DOWN button to navigate to the "Resolution" option 3. Press OK to view available resolutions: 1080FD/1920x1080, 720P/1280x720, etc. 4. Press the UP or DOWN button to make your selection 5. Press OK to confirm your entry 6. Press MENU to exit Video Settings 7. Press OK to start recording 8.
Remember to always make backup copies of all important data stored on the device. The manufacturer’s warranty does not cover loss of data resulting from user actions. 1. Press MENU once to enter Video Settings 2. Press the UP or DOWN button to navigate to the "Loop Recording" option 3. Press OK to view the current selection: 3min/5min/10min/OFF 4. Press the UP or DOWN button to make your selection 5. Press OK to confirm your entry 6.
WDR (WIDE DYNAMIC RANGE) Recommend Setting: On When enabled, this feature automatically adjusts exposure settings to improve recording quality in particularly bright or dim environments, providing balanced lighting and clearer recorded video. 1. Press MENU once to enter Video Settings 2. Press the UP or DOWN button to navigate to the "WDR" option 3. Press OK to view the current ON/OFF status for this feature 4. Press the UP or DOWN button to enable or disable this feature 5.
RECORDING AUDIO You may choose to record audio with video, or turn off the microphone so that all recorded videos will be muted. 1. Press MENU once to enter Video Settings 2. Press the UP or DOWN button to navigate to the "Record Audio" option 3. Press OK to view the current ON/OFF status for this feature 4. Press the UP or DOWN button to enable or disable this feature 5. Press OK to confirm your entry 6. Press MENU to exit Video Settings Alternatively, you can use a hot key shortcut for this feature.
PLATE NUMBER Enable this feature to enter your vehicle plate number for video recording. The plate number will stamp in the video. 1. Press MENU once to enter Video Settings 2. Press the UP or DOWN button to navigate to the "Plate Number" option 3. Press OK to view the current ON/OFF status for this feature 4. Press the UP or DOWN button and OK to enable or disable this feature 5. If "ON" is selected, enter the plate number on the next pop-up screen using the UP and DOWN buttons; press OK to next digit. 6.
SYSTEM SETTINGS Date/ Time Setup Use the following procedure to change the device’s time and date: 1. Press MENU twice to enter System Settings 2. Press the DOWN button to navigate to the "Date/Time" option 3. Press OK to view date/time in the format: YYYY/MM/DD HH:MM:SS 4. Press the UP or DOWN button to change the highlighted number. 5. Press OK to move to the next date/time segment and repeat step 4. 6. Press OK again to confirm your entry. 7. Press MENU to exit System Settings.
LANGUAGE Use the following procedure to change the device’s time and date. Language availability may vary depending on the region. 1. Press MENU twice to enter System Settings 2. Press the DOWN button to navigate to the "Language" option 3. Press OK to view the current language selection 4. Press the UP or DOWN button to change the selection 5. Press OK again to confirm your choice TV Mode Recommend Setting: NTSC This feature will setup video output format. 1. Press MENU twice to enter Setup 2.
Format Performing this operation will format memory card. Note: Any files in the memory card will be lost. 1. Press MENU twice to enter System Settings 2. Press the UP or DOWN button to navigate to the "Format" option 3. Press OK to view YES / NO confirmation for this operation 4. Press the UP or DOWN button to make your selection 5. Press OK to confirm your entry 6. Press MENU to exit System Settings DST Enable/Disable Daylight Saving Time 1. Press MENU twice to enter System Settings 2.
Alternatively, you can use a hot key shortcut for this feature. During Recording Mode, press and hold OK to turn the LCD screen on or off. Restore Default Factory Settings Performing this operation will reset all of your device's settings to their original values. Note: any user-customized settings will be lost. 1. Press MENU twice to enter System Settings 2. Press the UP or DOWN button to navigate to the "Default Settings" option 3. Press OK to view YES / NO confirmation for this operation 4.
Deleting Files To delete one particular file: 1. Press the UP or DOWN button to navigate through the stored video files 2. Press MENU to view options for the highlighted file: Delete/Protect/Slide Show 3. Press the DOWN button once to select "Delete" 4. Press OK once to view options for "Current MOV" file or "ALL" files. Select "Current MOV" 5. Press OK twice to delete file To delete all files: 1. Press on UP or DOWN button to navigate through the video files 2. Press OK to enter "Video" 3.
Capture Mode With this feature you can set a timer for automatically capturing images. 1. Press MODE once to enter Photo Mode 2. Press MENU once to enter Photo Settings 3. Press the UP or DOWN button to navigate to the "Capture Mode" option 4. Press OK to view the current selection: 2SEC/5SEC/10SEC 5. Press the UP or DOWN button to make your selection 6. Press OK to confirm your entry 7. Press MENU to exit Photo Settings 8.
4. Press OK to view the current selection: FINE/NORMAL/ECONOMY 5. Press the UP or DOWN button to make your selection 6. Press OK to confirm your entry 7. Press MENU to exit Photo Settings 8. Press OK to capture an image Sharpness This feature will automatically enhance captured images for a clearer, more distinct picture. 1. Press MODE once to enter Photo Mode 2. Press MENU once to enter Photo Settings 3. Press the UP or DOWN button to navigate to the "Sharpness" option 4.
Color This feature allows you to choose color effect for captured images. 1. Press MODE once to enter Photo Mode 2. Press MENU once to enter Photo Settings 3. Press the UP or DOWN button to navigate to the "Color" option 4. Press OK to view the current selection: Color/Black & White/Sepia 5. Press the UP or DOWN button to make your selection 6. Press OK to confirm your entry 7. Press MENU to exit Photo Settings 8.
Exposure This setting allows you to adjust the brightness level of captured images. The "+0.0" setting is recommended. 1. Press MODE once to enter Photo Mode 2. Press MENU once to enter Photo Settings 3. Press the UP or DOWN button to navigate to the "Color" option 4. Press OK to view the current selection: +0.0, +1/3, -1/3, etc. 5. Press the UP or DOWN button to make your selection 6. Press OK to confirm your entry 7. Press MENU to exit Photo Settings 8.
5. Press the UP or DOWN button to make your selection 6. Press OK to confirm your entry 7. Press MENU to exit Photo Settings 8. Press OK to capture an image Date Stamp This feature will automatically apply date and/or time stamp to captured images. 1. Press MODE once to enter Photo Mode 2. Press MENU once to enter Photo Settings 3. Press the UP or DOWN button to navigate to the "Date Stamp" option 4. Press OK to view the current selection: OFF/Date/Date & Time 5.
FEATURES: • 1080p Full HD Car Video Camera • Universal Dash Cam Windshield Mount • Also Includes Exterior Mount Backup Cam • DVR Recording: Save Driving Video Clips • Ability to Snap Pictures + Record Video • Easy Setup: Plug-and-Play Operation • Files Save via Micro SD Memory Card Slot • Built-in Rechargeable Battery • G-Sensor Auto-Saves Video During Collision • 1.
TECHNICAL SPECS: • Cam Image Sensor: AR0330, 6G Lens • Video Recording: 1080p / 720p / VGA • Video Filetype Saved: .MOV • Image Capture: 12MP / 8 MP / 5 MP / 3MP / 1.3 MP • Image Filetype Saved: .JPG • Date Stamp: ON / OFF • Viewing Angle: Wide, 170° Degree • Micro SD Card Support: Up to 32 GB, Not Included • Dash Cam Rechargeable Battery: 3.7V Polymer, 320mAh www.PyleUSA.
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
