User Manual
ww w.PyleUSA.com
12
SYSTEM SETTINGS
Date/ Time Setup
Use the following procedure to change the device’s time and date:
1. Press MENU twice to enter System Settings
2. Press the DOWN button to navigate to the "Date/Time" option
3. Press OK to view date/time in the format: YYYY/MM/DD HH:MM:SS
4. Press the UP or DOWN button to change the highlighted number.
5. Press OK to move to the next date/time segment and repeat step 4.
6. Press OK again to conrm your entry.
7. Press MENU to exit System Settings.
Note: If the battery remains fully discharged or is removed from the
device, the time and date will be reset.
Auto Power O
When enabled, this option allows the device to shut down automatically
if Recording Mode is not engaged.
1. Press MENU twice to enter Setup
2. Press the UP or DOWN button to navigate to the "Auto Power O"
option
3. Press OK to view the current selection: 3min/5min/10min/OFF
4. Press the UP or DOWN button to make your selection
5. Press OK to conrm your entry
Beep Sound
This setting allows you to turn the device's button sound eect on or o.
1. Press MENU twice to enter Setup
2. Press the UP or DOWN button to navigate to the "Beep Sound" option
3. Press OK to view the current ON/OFF status for this feature
4. Press the UP or DOWN button to enable or disable this feature
5. Press OK to conrm your entry