Owner`s manual
OPERA
TION 
BASI
C OPERATION 
S
W
IT
CHING ON/OFF THE UNIT   
Press button (6) to turn o n the  unit. 
Whe n the unit is o n, press  and  hold 
butto n (6 ) to  tur n the unit off. 
FACEPLATE RELEASE 
Press 
  butto n (2) to detach  the  
removable faceplate. 
SOUND ADJUSTMENT 
Rotate the  SEL button (4) to adjus t the  
volume. up or down step by step. 
Shortly press MUTE butto n (6) wi ll m ute the  
sound, press it again will resume the 
sound. 
LOUDNESS 
Press LOUD button (3) for several seconds 
to switc h lo udness functio n on, a nd “L OUD” 
will appear on the LCD for several seconds. 
Press it for several seconds again to 
release this function. 
DISPLAY   
Press DSP butto n (18) to change display all 
the  unit setting  and music information.   
R
E
S
ET FUNCTION 
RESET butto n (25)  must be activated with 
either a ballpoint pen or thin metal object.   
The RESET butto n is to be activated for the   
following reasons: 
-  Initial i nsta lla tion of the unit whe n a ll 
wiring is completed. 
-  All the function buttons do not operate. 
-  Error symbol on the display. 
Note: if press RESET button (25), the  unit   
can’t work yet, please use a cotton  swab 
soaked in isopropyl alcohol to clean the 
socket on the front panel. 
MODE SELECTION 
Shortly press MODE button (1) to change   
the  unit wo rking mode: Radio, USB, CARD, 
IPOD (optional), AUX and BT Audio. 
SYSTEM SETTING 
Long press the SEL button (4) on the fro nt 
panel to enter SYSTEM SETTING mode. 
There are below items to adjust. 
P-VOL /ADJ/ BEEP ON_OFF/LOC 
ON_OFF  ON/  STEREO_MONO/AREA 
_USA_EUR _ORT_B RZ 
Use SEL butto n (4) to select the item you 
want to change, and use SEL button (4) to 
change the corresponding  setti ng. 
1) BEEP ON/OFF: 
When the BEEP ON or BEEP OFF is  
displayed on the LCD, rotate the SEL   
butto n (22) to switch on/off the BEEP   
sound 
  2) P-VOL  
 P-VOL: The ma x volume  value  whe n you 
turn on the unit. Such as when you set 
the  P-VOL to 40. If the volume  value  is 
small tha n 40  whe n yo u turn off the unit. 
Next time yo u turn o n the unit. The  
volume will keep the last volume value. 
But if the vo lume va lue is la rge tha n 40  
whe n yo u tur n off the unit. The n next time  
you turn on the unit. The volume value  
will back to 40. 
3) Radio area setti ng: 
    Four areas are inside  , that are 
Europe,USA, Orition,Brasil. Rotate the 
SEL button (22) to set the radio area you 
wanted. 
AUDIO ADVANCED SETTINGS 
Short press the SEL button (4) o n the fro nt 
panel to enter advanced audio  SETTING 
mode: BESS-TREB-BAL L-R, FAD L-R. 
Rotate  the  SEL b utto n (4), you can change 
the Left and right balance and Fader. 
Equalization setting 
Long press EQ b utto n (21) to turn on   










