User Manual

www.PyleUSA.com

1. Turn ON/Standby:

Press this key to turn ON unit or switch to

stand by mode. At power ON, unit will

automaticly turn ON and restore to

previous status.

2/9. Dynamic Mode Adjust:

Switch to dynamic mode from static

color, or switch between dynamic modes.

3/10. Dynamic Speed Adjust:

Adjust dynamic playing speed Press

SPEED + to increase speed and press

SPEED - to decrease Unit will switch to

dynamic mode if press this key at static

cotor mode.

Remote Control

4/5. Static Color Adjust:

Switch to static color mode from dynamic mode, or switch between static colors.

6. Direct Color Select:

Shortcut key to static colors. When press the specic color key, LED will play the

same static color. The direct colors are included in 'COLOR +'

and 'COLOR-' operation.

7/8. Brightness Adjust:

Adjust static color brightness. Press BRIGHT + to increase brightness and press

BRIGHT - to decrease Unit will switch to static color mode If press this key at

dynamic mode.

11. Demo Mode:

Press this key will switch to Demo mode. At demo mode, it plays 17 dynamic

modes in loop, each mode repeat 3 times.

• 22 Dynamic Modes

• Card Type RF Remote

• 20 Static Colors

• Ultra Slim Design

• Very Smooth Eects

• Dynamic Demo Mode

• Speed Adjustable

• Easy Remote Pairing

• Brightness Adjustable

• Direct Color Select

Installation Guide

1. Speaker and RGB power + (red), (DC12V)

2. Speaker and RGB power - (black), (DC12V)

3. Connect to each other (Speaker and RGB wires)