User Manual

*Please remember to run cables in the least obtrusive route possible. Vehicle vibrations

and bumpy driving conditions can result, so extra care should be taken to securely

mount the camera and fasten all cables and wiring to secure locations.

*Ensure the wires are safely and securely connected, with proper isolation applied to

all connections.

Additional Notes:

• Determine the best location for the camera (The camera is preferably mounted just

above the license plate).

• Be sure when running the connection cables to leave a small amount of slack so you

can still move the camera around the license plate, if you decide to slightly adjust

the camera's positioning at a later time.

• After installation, Test the camera before use. Placing your vehicle in reverse should

provide a picture in the monitor within the rearview mirror assembly.

Front View / Rear View Camera Setup

You will have the ability to mount the camera in the front or rear of the installation

vehicle. The camera connection cable features integrated colored control wires (Black,

White, Blue), that can be activate or deactivate, front & rear view camera ability.

Rear View Setup

To Activate the Distance Scale Line Display: Connect/Disconnect the BLACK + WHITE

Control Wires

Front View Setup

To Flip the Image Horizontally (For Front/Rear View Camera Setup):

Connect/Disconnect the BLACK + BLUE Control Wires

The Camera Wire Connection