User Manual

STEP 1
STEP 2
STEP 3
STEP 5
STEP 4
WIRE DIAGRAM
WIRELESS BT PAIRNG AND CONNECTION
Power: Press and hold the power button to power ON/OFF.
Wireless BT Streaming Connection:
a. Ensure BT ability is activated, then search for the PLUTV58BKA from your BT-
enabled device. The light will turn blue and blinks while waiting for BT connection.
b. The PLUTV58BKA BT Network Name will appear as “PyleUSA”
(No password is required for connecting).
c. When the BT is connected, the light will turn blue and stops blinking.
AUX-IN/USB: Short press to switch BT mode to Aux-in mode/USB mode.
Auto Reconnection
a. When the device is out of BT range, BT will be disconnected automatically,
the light turns blue while blinking.
b. BT will automatically reconnect when detected in range again in 10 minutes.
PLUTV58BKA Speaker Installation
Speaker Mounting suggestion as below:
Auto Reconnection:
Step 1: Put the PLUTV58BKA speaker in a safe place.
Step 2: Slide in the buckle with rubber pad attached to the bracket stand of the
speaker. Attach the set to the handle bar of vehicle/ship.
Step 3/4: Attach screw to lock the buckle.
Step5: Option for adjustable PYLE logo---Unbolted the screws rst, adjusting
logo direction, then re-x screws.
www.PyleUSA.com
8
www.PyleUSA.com
9
Wire Color
Yellow
Black
White
Red
Red
Blue
Description
Battery (+), 12dc
Battery (-), Ground
Line out - L
Line out - R
ACC
REMOTE
AUX Input
DC12V(-) Grounded
to metal chassis
-BLACK
Fuse: 5A
USB
Remote Out
(Blue)
ACC Remote In
(Red)
+YELLOW
DC12V(+)
Grounded
to metal chassis
Line out-L Line out-R