User manual

www.pyleaudio.com

User Manual

1. Place the larger stand pole onto the hole of the round base, and

screw to tighten it onto the base bottom.

2. Loosen the brace on the pole, to allow adjustment of upper

stand pole and to the desired height.

3. Tighten the brace firmly to allow proper and secure mic holding.

4. Loosen the round knob clutch to adjust the angle of the boom.

Then tighten the round clutch securely afterwards.

5. Loosen the small knob to adjust the boom to desired length and

tighten it securely afterwards.

6. Insert and tighten the mic holder on the top of the boom.

Headquarters: 1600 63

Street

Brooklyn, NY 11204 – USA

Toll Free: (800) 444 – 5671

Tel: (718) 236 – 8000 Fax: (718) 236 – 2400

www.pyleaudio.com

PMKS15 - Micro

hone Stand