Manualshelf

User Manual

ManualsBrandsPyle ManualsCeiling & In-Wall SpeakersWireless Bluetooth Public Address Amplifier - 500W Compact Mini Digital Home Power Audio Sound PA Receiver System w/ 70V 100V Output, Mic Input, Radio, USB, Remote For 4-16ohm Speaker
12345678910
www.PyleUSA.com
6
20. WIRELESS BT ANTENNA: Please pull the antenna out when using Wireless BT
input
21. POWER DC INPUT: Connect the DC Power input terminals.
22. FUSE: Built-in 10A fuse
23. POWER SUPPLY: Connect to AC power socket.The unit is working with AC-115V
only, make sure to choose the correct voltage before you turn on the unit.
SPEAKER CONNECTION
One or more speakers (4,8,16 Ohms) can be connected to the amplier with or
without transformers. However, before you connect any speakers to the amplier,
the total impedance must be calculated in order to avoid damage to the amplier.
A total speaker impedance greater than 16 Ohms or less than 4 Ohms can cause this
damage to occur.
SYSTEM 1: SINGLE SPEAKER SYSTEM
NOTE: Connect the speaker (+) to the amplier’s 4-Ohm, 8-Ohm or 16-Ohm
terminal, depending on the speaker being used.
SYSTEM 2: Two (or more) Speakers in Series
NOTE: Connect the speaker (+) to the amplier’s 4-Ohm, 8-Ohm or 16 -Ohm
terminal, depending on the TOTAL IMPEDANCE of the two speakers.
If each speaker has an impedance of 8-Ohm, the total speaker impedance in this
series conguration is 16 ohms.
ONE SPEAKER
8 ohm Speaker