Owner`s manual

TROUBLE SHOOTING
SYMPTOM A: NO AC POWER OUTPUT, THE RED LED LIGHTS.
POSSIBLE CAUSES SUGGESTION
The connected AC products are rated at more than 150 Watts Use the product with a total power rating
(PNVR300) , 220 Watts (PNVR450) or 400 Watts (PNVRBOO), less than t50 Watts (PNVR300), 220 Watts
the overload shutdown occurred. (PNVR450) and 400 Watts (PNVRBOO).
The connected AC products are rated at less than 150 Watts Use the product not exceeds the inverter's
(PNVR300) , 220 Watts (PNVR450) or 400 Watts (PNVRBOO), surge capacity, 300 Watts (PNVR300) , 450
the high starting surge causes the overload shutdown. Watts (PNVR450) and BOO Watts (PNVRBOO).
The battery is discharged (alarm sounds) Recharge battery.
The inverter overheated
Tum 011 the inverter and allow to cool for 15
minutae. Clear blocked fan (pNVR300
IPNVR45OJPNVRBOO) or re"""", the objects
COYSring the ventilation.
SYMPTOM B: NO AC POWER OUTPUT, NO LED LIGHTS ARE ON.
POSSIBLE CAUSES SUGGESTION
The lighter socket or
12 Volt outlet has been poor contacted Press plug into socket firmly.
The lighter socket or 12 Volt may require ignition to be on. Turn key to accessory position.
The fuse of cigarette lighter or 12 Volt outlet is blown Check vehicle fuses and replace.
The fuse of inverter is blown Check to make sure the inverter is
connected to a power source with correct
voltage and polarity.
Replace fuse.
The inverter has been connected with reverse
DC input The inverter needs repjairment
polarity. if the probable damage has occurred.
6