User Manual

8. One touch ON/OFF key and LED: Press to power ON/OFF. The LED indicates

the related outlet's status.

9. Internal delay time selector: Choose the internal power sequence delay

time: 0.5 seconds or 2 seconds.

10. USB Charge (5V/2A): Charge for Mobile phone (5VI2A) each.

11. Power switch for the assistance light: Power ON/OFF the light according to

the switch position.

12. Assistance light connector: This is BNC connector, it can supply 12V/0.5A

power, use a gooseneck light to connect.

13. Always Power Outlet: Assistant power outlet, connects to the AC input

directly, power always valid.

Rear Panel Introduction

1. Main power supply with standard American plug

2. Input Voltage Selective: Power Supply Switch at 115V/60Hz or 230V/50Hz

3. Outlets OUT1-OUT8: Power outlet can carry 15AMP (RMS) each outlet,

otherwise the unit is not safe.

4. Remote Control link: You can set a extra switch to replace the power switch

to achieve the long distance control.

5. LED for remote control: Indicates the unit status, use it with Remote control.

6. Link out: Many unit works via link, if you want to link next unit, the lower unit

should be connected here.

7. Link in: Many unit works via link, if you need to link up, then the upper unit

should be connected here.

www.PyleUSA.com

BlOCK DIAGRAM

Filter Schematic Diagram