PSBV200BT 300 Watts Bluetooth Sound Bar Systems W/ USB SD FM Radio& Wireless remote PSBV200BT STANDBY SD INPUT USB OWNER’S MANUAL PLEASE READ BEFORE OPERATING THIS EQUIPMENT WWW.PYLEAUDIO.
TABLE OF CONTENTS TABLE OF CONTENTS---------------------------------------------------------------1 PACKAGE CONTENTS----------------------------------------------------------------1 IMPORTANT SAFETY INSTRUCTIONS---------------------------------------2-3 FEATURES---------------------------------------------------------------------------------3 SPECIFICATIONS------------------------------------------------------------------------4 PLACING THE UNIT---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Dangerous high voltages are present inside the enclosure. Do not open the cabinet, refer to qualified personnel only. The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert user to the presence of uninsulated "dangerous voltage" within the product's enclosure, that may be of sufficient magnitude to constitute a risk of electric shock.
10. Unplug this apparatus during lightning storms or when unused for long period of time. 11. Power Source The product should be operated only from the type of power source indicated on the rear of the unit. 12. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 13.
SPECIFICATIONS Power Supply---------------------------------------------------AC:100~120V, 50/60Hz Peak RMS Output--------------------------------------------------------------------300W Input Sensitivity-----------------------------------------------------------400mV±50mV S/N(A Weight)----------------------------------------------------------------------- 80dB Channel Separated Rate(1KHz)------------------------------------------------ 40dB Woofer Impedance--------------------------------------------------
SYSTEM CONNECTIONS 1. CONNECT POWER SUPPLY Insert the power plug into a wall socket. Make sure the voltage marked at the rear panel is same as your AC power. Do not operate with wet hands to avoid electric shock. Socket Power plug PSBV200BT STANDBY INPUT SD USB 2. CONNECT WITH PC/MP3 To listen to the sound source from PC (Computer) or MP3 Players, connect the unit with the external device as below: AUDIO IN DC:18V/2.5A 3.
3.
FRONT PANEL FUNCTIONS PSBV200BT STANDBY INPUT SD USB 1. Power switch 2. Standby 3. Input 4. Play/pause/phone 5. LCD display 6. Power indicator 7. Remote sensor 8. Pre / VOL9. Next / VOL+ 10. USB host 11. SD/MMC slot 1 2 3 4 5 6 7 8 9 STANDBY INPUT 10 11 BACK PANEL FUNCTIONS DC:18V /2.5A 1 2 AUX 1 FM ANT PC/MP3 3 4 AUX 2 L INPUT DC:18V/2.5A SELECT R 1. PC Mp3 FM ANT input jack. 2. AUX 1 L+R input jacks. 3. AUX 2 L+R input jacks. 4. DC: 18V/ 2.5A .
REMOTE CONTROL FUNCTIONS 1. STANDY-BY: Press to turn on the unit 2 from standby model. Press again to turn 3 1 5 the unit off(stand-by). 6 4 8 2. 3D: Press to turn on the surround 7 9 11 sound effect. Press again to turn it off. 10 12 3. MUTE: Press to turn off the sound 13 14 temporary, press again to turn the sound 15 16 back. 18 17 19 4. INPUT: Press repeatedly to select the input source as desired. 5. CH+: In FM radio mode, press to search the stored upper channels. 6.
HOW TO USE THE REMOTE CONTROL 1. Battery Installation: a. Slide and lift up the battery door. b. Install two "AAA' size batteries (included) into the battery compartment according to the polarity markings inside battery compartment. c. Replace the battery door. BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2.
OPERATIONS 1. GENERAL OPERATION 1) Press the POWER button on the front panel of the unit to turn the unit to Standby mode. 2) Press the STANDBY button on the unit or remote control to power on the unit. 3) Press the INPUT button on the unit or remote control repeatedly to select the input sources to USB, CARD, FM radio, Blue, AUX1, AUX2, PC as desired. 4) Hold Press the ( or )VOL +/- buttons on the unit or press it on remote control to adjust volume as desired.
2. LISTEN TO FM RADIO Connect the supplied 3.5mm audio cable to FM ANT jack on the rear of the unit as the figure below. Extend the wire and relocate it to get the best reception. AUX 1 AUX 2 L INPUT SELECT PC/MP3 R DC:18V/2.5A 1. Power ON the unit as previous procedures. 2. Press the INPUT button on the unit or remote control repeatedly until FM frequency appears on the display. 3. Press or button on remote control repeatedly to search the specific radio stations.
3. SD/USB SLOT OPERATION Before connecting USB flash drive or SD cards please make sure they are in right direction. Refer following figure. 1. Power ON the unit as previous procedures. 2. Insert SD cards to SD slot and/or USB memory stick to USB slot. 3. Press INPUT button on the unit or remote control repeatedly until CARD or USB is displayed. To play files in USB, choose USB. To play files in SD card, choose CARD. 4. The unit will play the MP3/MWA songs automatically. 5.
3. When mobile phone had a call the unit will show “CALL” press” ” to listening phone and the meanwhile you will enter handsfee mode, the effect distance will be 1 meter. Hang up by repeat press “ ” the unit will resume to play music. 4.The bluetooth of Unit will auto search and connecting with the last mobile phone after power off. 5. Our products had pass BLUETOOTH BOB certificates Note: FCC ID This device comply with parts 15 of the FCC rules.