User`s manual

22
 Remember to put the Mode Switch in your desired recording position before inserting the camera in the
waterproof case. There is no external button for the Mode Switch.
 After every use in salt water you will need to rinse the outside of the housing with non-salt water and dry.
Not doing this can eventually cause corrosion of the hinge pin and salt buildup in the seal, which can cause
failure.
 To clean the seal, rinse in fresh water and shake dry (drying with a cloth may cause lint to compromise the
seal). Re-install the seal into the grooves in the backdoor of the housing.
Technical parameters
Image sensor
5M pixels (CMOS)
Function mode
Video recording, photo, removable disk
Camera lens
F3.1
f=2.9mm
Digital zooming
4X
Shutter
Electronic shutter
LCD display screen
2.4-inch touch screen
Image resolution
12M (4000 × 3000), 10M (3648x2736), 8 M (3264x2448), 5M (2560×1920)
Video resolution
VGA: 640x480 (120 frames / sec), HD: 1280x720 (60 frames/sec.) FHD:
1920x1080 (30 frames/sec.)
White balance
Automatic
Exposure
Automatic