For correct usage please read these instructions carefully and keep these instructions in a safe place for future reference
SAFETY PRECAUTIONS Important: Do not expose this product to rain or moisture to preserve the life of your product. Caution: Do not disassemble this unit. To prevent the risk of electric shock, do not remove cover. Ventilation: The device should be situated so that its location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug or similar surface that may block the ventilation openings.
PACKAGE CONTENTS • • • • • • • • • • Film scanner Negative Adapter Slide Adapter 110 lnsert Super8 lnsert Video cable USB cable AC/DC adapter Brush User’s Manual Please remove the adaptor from the mains when not in use. OPERATION GUIDE HOME / MODE: MAIN MENU 1. 2. 3. 4. 5. 6. Language mode USB mode Capture mode Playback mode Film Type Resolution 3 www.PyleUSA.
HOME / MODE: NO MEMORY CARD No memory card indicator If there is no memory card inserted into the device, a warning icon will be shown on the screen when entering the main menu. 1: CAPTURE OR After the welcome page, the above menu will appear. User can press LEFT/RIGHT button for desired menu, then press OK button to confirm the selection. 1.1 Adjust brightness and color of image You can adjust brightness and color of image in capture mode.
the live view will be adjusted accordingly (This step can be used to correct a misplaced film/photo; either upside down or flip). Mirror and Flip function can only be used while in the live view mode. Mirror Press LEFT button to change image left to right Flip Press RIGHT button to upside down image 1.3 CAPTURE MODE live view indicator Once entered capture mode, there will be an indicator on the left top corner to indicate it is in live view mode.
1.5 LIVE VIEW CAPTURE/EDIT MENU SCAN OK Once press SCAN button in live view, the edit menu will appear. When user press the OK button, the current image will be saved to internal memory or memory card when there is a memory card inserted, the display will return to live view again. 1.6 CAPTURE: SAVE Save Once user press SCAN button, preview (live view) image will be selected and shown on the TFT which will take between 1~2 second with 2 icons shown on the left side of the screen.
Select Home icon with LEFT/RIGHT button, then press OK button or press MENU button on top of the device anytime to return to main menu 1.9 EXIT FROM EDIT MODE BACK TO CAPTURE MODE (LIVE VIEW) Once user press OK button for save or cancel option, the display will return to capture mode/live view. Then user can move the film holder to next target film or change another photo to capture. 1.
2.2 PLAYBACK: EDIT MENU 1. Rotate +90: Captured image rotate +90 degrees 2. Rotate –90: Captured image rotate –90 degrees 3. Delete: Delete this picture stored in internal memory or memory card 4. Exit: Return to Slide show mode 5. Save: Save the modified image to internal memory or memory card 6. Home: Return to main menu 2.3 PLAYBACK: SLIDE SHOW SINGLE PICTURE EDIT MODE User can interrupt (stop) slide show mode to stand alone playback mode (single picture playback) by press OK button.
2.4 PLAYBACK: ROTATE/SAVE OK If user wants to rotate +90 degrees by OK button, the image will be rotated +90 degrees and cursor will remain at Save. Press OK button again to save modified result and next picture will be shown. For continuously rotate +90 degrees, move cursor to rotate again and press OK button. (Same for Rotate –90 function) 2.5 PLAYBACK: EXIT OK Once user select Exit function in edit menu, the display will go back to slide show starting with the current picture without any change 2.
2.7 PLAYBACK: HOME Select Home icon with LEFT/RIGHT button, then press OK button or press MENU button on top of the device anytime to return to main menu 2.8 PLAYBACK: NO PICTURE If there is no picture when enter playback mode, a No picture symbol will show on screen USING THE ADAPTER PLATES Once you’ve set your scanner to the correct film type, be sure to choose and use the proper adapter for the job.
1. Before inserting Adapter, set down scanner on flat, stable surface with LCD display facing you. 2. Use included Cleaning Brush to gently wipe scanner lens. 3. DO NOT insert any plates from the left side of the unit. 4. Ensure “This Side Up” side of Adapter is facing upwards. 5. Ensure small arrow on Adapter is facing leftward. 6. From right side of unit, slide Adapter inward until it clicks. 7. To use Super8 or 110 lnsert, open Negative Adapter fully and place on flat surface. 8.
3. Always handle films with care to avoid scratches or fingerprints. 4. When inserting a negative, feed it in slowly until you see the full image on the viewer display. FILM TYPE When the Film scanner mode is selected, user can change film type by enter Film Type menu when power on the device or access the main menu by Home icon/MENU button anytime. Press LEFT/RIGHT button for Film Type and press OK button to confirm. 1. Negatives Film: Select Negatives film when load color negative film in holder 2.
1. 14M Resolution 2. 22M Resolution User can press LEFT/RIGHT button to select resolution, then press OK button to confirm LANGUAGE Change language definition by enter language menu when power on the device or access the main menu by Home icon/MENU button anytime. Press LEFT/RIGHT button for language and press OK button to confirm.
Question: The device cannot connect to the computer. Answer: Please check if the cable has already connected to the USB port of the computer. Or connect the cable to another USB port. It is recommended that connect it to the motherboard directly, not to the front panel. Turn on the power button, enter USB mode, it acts as a mass storage device. TECHNICAL SPECIFICATIONS • • • • • • • • • • • • • • • • • Interface: USB 2.0 Sensor: 14 mega pixels CMOS sensor LCD: 2.