Operating Manual

Remote Control Operation
1. Remote control should be operated within 6
meters and the scope of 30 in front of receiver.
2. Make sure that there is no big obstacle between
remote control and machine.
3. Remote sensor should be far away
from the light, high amounts of light can affect its performance.
6
Main Channel Power Output
Technical
※ Specifications subject to change without prior notice
Technical Specifications
THD(1KHz)
<1%
±2dB
Input Sensitivity
Impedance
Signal to Noise Ratio
Frequency Range
Dimension
19 (W) x 11.4 (D) x 4.7 (H) inch
Normal Load Impedance
8 Ohm
CD/DVD AUX
Microphone
Pure Amplifier
>76dB
KARAOKE
>71dB
Frequency Response(40Hz-15KHz)
Tone Characteristic(100Hz-10KHz)
Power Requirements
AC~110V/60Hz AC~220V50Hz
Weight
PMPO, 4 Ohms, 1KHz test
PT260A
100WX2
300mV/33k Ohm
6mV/600 Ohm
±14dB
9.9 lbs
3
Remote Technical Specifications
1. Signal input selector
CD/DVD,IPOD/MP3,BT,TUNER selector
2. Number buttons
Using for st SELECT & STORE
3. MEMORY
After a station has been found，you can store the station
by pressing the MEMORY button.
4. AUTO SCAN
AM/FM auto scan selector，scan and store stations
automatically. Can store 50 stations.
5. ST/MONO
Stereo and mono selector.
6. AM/FM
AM/FM selector.
7/10. DISP- / DISP+
Display Down And Up
8/11. VOL- / VOL+
Master Volume Down And Up
9. MUTE
Mute Selector
12. TUNING▲ TUNING
The two keys are used to adjust to the best signal of
the stations.
13. USB/BT Play Next
14. USB/BT Play Prev
15. USB/BT Play/Pause
NEXT>PLAY/PAUSE
1
3
6
9
4
7
10 10+
5
8
ST/MONO
AUTO SCAN
AM/FM TUNING
MEMORY
2INPUT
PREV<
DISP-
DISP+
VOL+
VOL-
1
2
3
4
5
6
7
12
13
14
15
11
10
9
8