PT796BT Wireless BT Streaming Home Theater Receiver 7.1-Ch Surround Sound Stereo Amplifier System with 4K Ultra HD Support, MP3/USB/AM/FM Radio (2000 Watt MAX) Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
Safety Precautions A. Avoid opening the cover or back panel. Do not open the cover, fix or touch the inner parts. No user-serviceable parts inside, refer servicing to qualified service personnel. B. Protect voltage line. Avoid high pressure and to be stomped on, do not pull, push excessively. C. Please put on this unit in the windy place, avoid direct sunshine and nearing heater. Place the unit in a location with adequate air circulation. D.
REAR PANEL FUNCTION REMOTE DEVICE FUNCTION 1. TUNER ANTENNA JACK: Properly connect for AM and FM antenna 2. OPTICAL INPUT JACK: Connect the optical signal output of other sound equipment 3. COAXIAL INPUT JACK: Connect the coaxial signal source output of other sound equipment 4. HDMI 1 INPUT JACK: Connect the HDMI signal output of other sound equipment 5. HDMI 2 INPUT JACK: Connect the HDMI signal output of other sound equipment 6.
System Connection Operating Instructions Preparation before operation • This product must be placed on a flat, solid object to ensure that it has sufficient capacity to support the product without falling. • Please use this product according to the safety requirements in front of this manual and connect with other products (TV, speaker, DVD player or player) as required. • Open the audio source device connected to this product • Press the power switch button on the panel to turn ON the power.
MAIN CHANNEL TONE AND BALANCE Wireless BT Function Press the 'MENU' on the control panel of the receiver system. Adjust the display 'TRExx' 'BASSxx' and 'L-- //--R'. 'VOLUME/MULTI' is volume/Multi-function knob. This knob can adjust main channel bass/Treble volume level and Left/Right channel volume balance. 1. The receiver connects to your Wireless BT-enabled device, allowing the system to receive your Wireless BT signal and stream audio to any connected speaker system. 2.
MUTE Press 'MUTE' button on the remote control to turn ON or OFF MUTE function. STANDBY Press 'STANDBY' button on the remote control to turn ON standby state. Press again to cancel standby mode. Troubleshooting Problem Probable Cause Solution No display The power socket is in poor contact or without electricity Check the power supply and plug of the socket. There’s display but no sound output 1. The speaker wiring is wrong. 2. The playback source doesn’t corresponds to the selected signal state 3.
