PT696BT Wireless BT Streaming Home Theater Receiver Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com 5.
Safety Precautions A. Avoid opening the cover or back panel. Do not open the cover, fix or touch the inner parts. No user-serviceable parts inside, refer servicing to qualified service personnel. B. Protect voltage line. Avoid high pressure and to be stomped on, do not pull, push excessively. C. Please put on this unit in the windy place, avoid direct sunshine and nearing heater. Place the unit in a location with adequate air circulation. D.
REAR PANEL REMOTE DEVICE FUNCTION 1. STANDBY: Power standby 2. Mute controls button 3. HDMI ARC ON/OFF button 4. HDMI input select button 5. COAX/OPTI input select button 6. USB/BT input select button 7. DVD/CD input select button 8. TUNER input select button: 1. TUNER ANTENNA JACK: Properly connected AM/FM antenna 2. DVD/CD INPUT JACK: Connect the audio output jacks of DVD/CD to these jacks 3. AUX INPUT JACK: Connect the audio output jacks of AUX to these jacks. 4.
19. TUNER + : Scan + control button. SYSTEM CONNECTION This button is used to adjust the best signal of the stations in AM/FM system. Press and hold this button to tune the program upward, it will stop until it found the station. Auto memory the stations to corresponding station number position. 20. USB/BT and AM/FM programs number controls button USB/BT preview or AM/FM programs USB/BT pause or play USB/BT next or AM/FM programs+ 21. SCAN: AM/FM auto scan selector 22.
Operating Instructions Preparation before operation • This product must be placed on a flat, solid object to ensure that it has sufficient capacity to support the product without falling. • Please use this product according to the safety requirements in front of this manual and connect with other products (TV, speaker, DVD player or player) as required. • Open the audio source device connected to this product • Press the power switch button on the panel to turn ON the power.
Wireless BT Function 1. The receiver connects to your Wireless BT-enabled device, allowing the system to receive your wireless bt signal and stream audio to any connected speaker system. 2. Press the ’ANALOG INPUT’ on the remote control or control panel of the receiver system, then enter to ’BT’ mode--as indicated on the display screen. 3. Ensure Wireless BT is activated on your device and search for BT Network named: PYLEUSA 4. No password is required for connecting.
Features: • 5.
