Operating instructions

USING STEREO HEADPHONES(NOT INCLUDED)

!Connect a set of stereo headphones with a 3.5mm plug to the PHONE jack on

the front panel. Before putting on the headphones always set the

OFF/VOLUME control to a low level, then put the headphones on and gradually

increase the volume to a comfortable listening level. The built-in speakers

automatically shut off when headphones are connected to the PHONE jack.

AUX IN FUNCTION OPERATION:

Select to the PHONO function. Insert two ends of cord into “AUX IN” socket of

unit and corresponding socket of your external device respectively. Operate

external device as usual and through the speaker of unit can hear the songs

from the external device.

RECORDING tracks from CD/MP3/PHONO/CASSTTE to USB

speed as long as the buttons are depressed. When you hear the desired

passage release the buttons. Normal playback will resume at that point.

During CD or MP3(in CD/USB mode)playback, repeatedly press FOLDER +/+10

or FOLDER-/-10 buttons on the remote control to skip to higher or lower 10

number tracks by pressing one time. During the CD or MP3(in CD/USB mode)

stop mode, repeatedly press FOLDER+/+10 or FOLDER-/-10 buttons on the

remote control to skip higher or lower folders. When the desired folder number

appears on the display release the buttons and press PLAY/PAUSE button to

begin play.

PTCDCS3UIP

external device A

AUX IN

CD RECORDING

Set the function selector(AM/FM/PH/CD/USB/TA) to CD/USB position, place

CD disc into the CD drawer, press PLAY/PAUSE to play the disc.

Press SKIP FWD. or SKIP REV. button to choose record the desired track.

Plug U Disk into USB socket, press RECORD button once to enter into

Record mode, ‘rEC’ indicator remains ‘On’. Press RECORD button twice will

start to record the playing track into USB, the track will be re-start play from

Rotate the VOLUME control clockwise and set the volume to a low level.