Operating instructions

7.) Look at Fig7. Match the holes on the U-type(B) bracket according with the

holes on the PTCDCS3UIP host cabinet as shown. Rotate clockwise four

screws D(H) into the holes on the sides and one screw B(F) inot the middle

and tighten.

8.) Look at Fig8. It shows the assembled PTCDCS3UIP host cabinet with the

U-type bracket (B) apparatus.

Fig7

Fig8

9.) Look at Fig9. Nest the assembled big horn speaker (A) into the tubing of the

PTCDCS3UIP host cabinet in the correct position. Rotate one screw B(F)

clockwise into the hole. Tighten clockwise with a Philip's head screwdriver. It

should be able to be turned freely by rotating the big horn speaker lightly.

Fig9