CAU T ION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 1) Please read these instructions and keep them for future reference. 2) Pay attention to all warnings. 3) Follow all instructions. 4) Do not use this apparatus near water. 5) Clean only with a dry cloth.
IMPORTANT NOTES Avoid installing this unit in places exposed to direct sunlight or close to heat radiating appliances such as electric heaters, on top of other stereo equipment that radiates too much heat, places lacking ventilation or dusty areas, places subject to constant vibration and/or humid or moist areas. Do not attempt to clean this unit with chemical solvents as this might damage the finish. Use a clean dry cloth.Operate controls and switches as described in the manual.
This product is designed to operate on 120V 60Hz AC Mains only. Attempting to operate this system from any other power source may cause damage to the system, and such damage is not covered by your warranty. NOTE: You will note that this system is equipped with domestic standard AC power 2-pin plug. If this plug does not fit into your existing AC outlet, do not try to defeat this safety feature by filing the wide blade to make it fit into your outlet.
4
40 41 36 42 37 43 38 44 39 45 CD USB SD 5 FOLDER 46
1. 2. 3. 4. 5. 6. 7. 8. 9. When you have finished listening to the radio, turn the volume knob in a counterclockwise direction to switch the unit off. Unplug it from the power supply if you are not going to use it for a while.
1. Open the dust cover and turn the volume knob clockwise to turn the equipment on. 2. Use the function selector to select PHONO mode. 3. Set the speed selector to the appropriate position: 33, 45 or 78, depending on the record to be played. 4. Set the auto stop control to ON if you want the turntable to stop turning when it has reached the end of the record. If the switch is set to OFF, the turntable will continue turning at the end of the record. 5.
1. 2. 3. 4. 5. 6. 7. 1. Turn the volume knob clockwise to turn the equipment on. 2. Use the function selector to select TAPE/AUX mode. 3. Insert a cassette with the tape facing away from you, as illustrated on the right. The EJECT/FAST FORWARD button will pop out and the system will start playing the tape automatically. 4. Turn the volume knob to your desired level. 5. To fast forward the cassette tape, press the EJECT/FAST FORWARD button halfway down while the cassette is playing.
1. 2. 3. 4. 5.
1. 2. 3. 4. 5. 5. 1.
2. 3. 4.
1. 2. 3. 4. 5. 6. 7.
1. 2. 3. 4. 1. 2. 3. 4. 5. 1. 2. 3. 4.
1. 2. 3. 1. 2. 3. 4. 1. 2.
3. 1. 2. 3. 1. (USB drive, SD or MMC card).
2. 3. 4. 5.
17
