PTVWEB75UHD
CONTENTS GENERAL SAFETY 1 GENERAL SAFETY INSTRUCTIONS 2 INSTALL ATION 5 WALL MOUNTING 6 CONTROL S AND CONNECTIONS 7 REMOTE CONTROL 9 MENUS 10 FAQS 24 SPECIFICATIONS 25
GENERAL SAFETY Read this manual thoroughly before you start using the TV. Store this manual, the completed warranty card, your receipt and the product packaging. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings.
GENERAL SAFETY INSTRUCTIONS If4PORTANT INFORNATION • Do not expose this appliance to rain or moisture as it may result in fire or an electric shock hazard • Do not temper or change or modify the product in any way. • Only use Accessories outlined and recommended by the manufacturer. • Please do not expose the product to splashing or water contact • Please do not place any object on top of the product including objects filled with liquids such as vases. • Danger of explosion if battery is incorrectly placed.
GENERAL SAFETY INSTRUCTIONS • Please beware that Dust could accumulate over time on the unit and cause it to generate heat and or deteriorate insulation, which in turn may result in an electrical fire. • The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age, They must be supervised product by a person responsible for their safety.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
INSTALLATION Attaching the stand BACK OF TV Step I Place a soft cushioned material on top of a flat surface to prevent damaging the screen panel. Then place the TV screen flat on top, with the screen side facing down, as illustrated on the right. Step 2 Align the stand leg to the installation point,as illustrated on the right. Step 3 Tighten the screws (supplied) with a screwdriver to affix the stand to the panel, as illustrated on the right.
CONTROLS AND CONNECTIONS TV Buttons ' IR Sensor Power Indicator Button Descripction VOL+, VOL- Press to adjust the volume level, or press to select or adjust a menu item. CH+, CH- Press to select desires channels, or press to select or adjust a menu item. MENU Press to display the setup menu on the TV screen. INPUT Press to select TV or all video input modes. POWER Press to turn TV on or turn to standby mode.
OPTICAL HDMI2 HDMI1 ( USB1 ) CONTROLS AND CONNECTIONS RJ45 Connector OO PO O O Function L R EARPHONE HDMI3 RF Descripction USB Insert USB. RJ45 Connect to the Ethernet. AV iN Video and Audio(L/R) input Terminal, Audio(L/R) can be used as YPbPr Audio input. EARPHONE HDMI Ö AV RF OPTIMAL Connects audio amplitier or other device with that audio input. Connect to equipment with HDMI output. Antenna Input terminal Connect to equipment with antenna output or wall antenna socket.
REMOTE CONTROL mm 1 POWER: ON/OFF. TV : Switch to TV. @ : Search. SUBTITLE: Enable/disable subtitles. : Enter the Quick Settings menu. : Select an input source. 0-9: Number selection key. LIST: Checking the saved programmes. : It displays the additional buttons on the remote control. QUICK ACCESS: Brief : Number Key / Hold : Quick Access VOL+/- : It adjusts the volume level. CH+/- : You can change the programme. FAV: Press to display the favourites list. GUIDE: You can check the programme.
MENUS Live TV Preparation Watching Broadcast TV 1. Connect the broadcast antenna to the TV. You can also connect a piece of equipment that can receive broadcasting such as a set-top box instead of the antenna. Launch —• — connection — device connection settings —+ universal control settings. 2. Start the —• —•programmes0programme tuning (programme tuning & settings)0auto tuning. Finds and adds only programmes being broadcast.
MENUS 1. Connect the Lan port (RJ45) of the tv and the router using a Lan cable. The router should be connected to the Internet beforehand. If the router supports DHCP, the lv is automatically connected to the network when you connect the tv to the network with a Lan cable. If the network is not automatically connected 2. Press the button on the remote control. 3. Select — connection —• network connection settings —+ wired connection(Ethernet).
MENUS The wireless environment can make wireless network service run slowly. Failure to turn off all local home networks may cause excessive traffic on some devices. The access point device must support wireless connections and wireless connection feature must be enabled on the device to have AP (access point) connection. Contact the service provider for availability of wireless connections on the access point. Check SSID and security settings of the AP.
MENUS If the pointer is not responding smoothly, you can reset the pointer by moving it to the edge of the screen. Use the remote control within the specified range (within 10 metres). The device may not function properly when outside the working distance or when an obstacle blocks the line of sight. -Depending on the peripherals (wireless router, microwave oven, etc.), communication failures may occur. Impacts can cause the Magic Remote to malfunction.
ENGLISH Enter #$% Aa Clear all peak to enter text ( e to change la VOICE RECOGNITION RESULTS RETRY Finite Challenge Infinite Challenge Entrapment Challenge 13
MENUS Cautions When Using Speech to Text Check the network connection before using the Speech to Text function. You can change the language in — — General — Language —+ Menu Language. To switch to another speech recognition language temporarily , press the (RED) button in the voice recognition information display window. You can only use this function to agree to voice recognition terms.
MENUS 1. Selecting a number that has already been registered allows deregistering it. 2. When you select a number that has not been registered, items that can be registered will be shown. 3. An item that has been registered to a different number is indicated with a check mark. 4. You can view a brief instruction for this function. Recording Using the Recording Functions 1.Connect a USB HDD or USB stick to a USB port. It is recommended that you record to a USB HDD. 2.
MENUS Do not remove the USB cable while recording. If you force your TV to power off while recording, the recorded content may not be saved. You should stop the recording and check that the programme has been recorded before turning the TV off. Recording quality depends on the performance of the USB storage device. If a USB storage device is faulty, recording may not be completed properly. The USB storage device may not work or function properly when a USB hub or extension cable is used.
MENUS 1.Select the storage device to play, the type of recording, the sorting method, and the view type. 2.Select and delete the desired content. 3.Display detailed information about the content. You can change the title of the content in the detailed information pop-up. 4.Launch Search. You can only play recordings made on this TV. Playing Recordings You can access and operate basic features such as playback and pause on the playback screen. 1.Select your desired recording from the Recordings app. 2.
MENUS 1. Return to Recordings. 2. Display recordings list below thumbnail image while recordings playback. 3.Turn subtitles on or off. 4. Select audio language that can be outputted. 5. You can set continue watching to resume playing from the last viewed scene. 6.Returns to the basic operation screen. The configurable items differ depending on model. Using Home Dashboard You can select or control a device (mobile, external device, Home IoT Devices, etc.) connected to the TV.
MENUS 1. You can check and select the smart device connected with the ThinQ app. Please refer to Connecting External Devices Connecting Smart Devices in User Guide for more information on the action. 2. You can play sound from a smart device connected via Bluetooth. Please refer to Connecting External Devices Playing Sound from a Smart Device through the TV‘s Speakers in User Guide for more information on the action. 3.
MENUS If you are in an area where the ThinQ app is not in service,ThinQ device connection will not be supported. If you are controlling the external device from your mobile app, you might not be able to control the device from your TV. Quit the mobile app to control it from your TV. 1.You can easily control your device by presetting the desired operations. 2.You can log in/out to and from the ThinQ account you created on mobile. 3.
MENUS 2. Connect your TV and smart device to the same Wi-Fi network. You can check the Wi-Fi network of TV at —• —+ Connection —+ Network Connection Settings —+ Wi-Fi Connection. 3. Run the ThinQ app installed on your smart device. 4. Follow the instructions from ThinQ app to connect your smart device to the TV. When your account information of ThinQ is linked to the TV, you can manage the IoT devices linked to your account using Home Dashboard of the TV.
FAQS GENERAL PROBLEMS WITH TV SET No Power. Make sure power plug is inserted correctly into power outlet. No Picture. Blake sure the following is connected correctly • Adjust the antenna • Move TV away from any products that may cause interference. • Autotune the unit again • Go to another channel No sound or • • • • • • Make sure everything is connected correctly Check if input settings for TV is correct Audio settings are properly set h4ake sure volume is not muted.
SPECIFICATIONS Operating System Powered by webOS Display Device 75 Resolution 3840x2160 Display Colours 1.07G Contrast ratio: 5000:1 Aspect Ratio 16:9 Multimedia Playback Movie: .asf/ .avi/ .Mp4/ .MOV/ .3g p/ .mkv/ .ts/ .trp/ .tp/ .mpg/ .mpeg/ .vob Format under Nusic: .Mp3/ .WAV/ .ogg/ .flac USB Mode Photo: .J PEG/ .J PG/ .J PE/ .PNG/ .
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
