PUCRC660 Smart Robot Vacuum Cleaner Robot Cleaning Vacuum with App Control and Remote Control
Mop function only available with purchase of Mopping Attachment Kit -Pure Clean Model: PRTPUCRC6605 (Sold Separately) Quick Guide Using the APP and Amazon Echo Matching 1. APP Download Scan below QR code [Fig. 1] of weback APP, or search "weback" [Fig. 2] and download. Fig. 1 Fig. 2 2. Log In/Register weback ID If you have already got an weback ID, please open weback APP, LOG IN [Fig. 3] and start from ADD DEVICE [Fig. 4]; If you’re a new user of weback, please start from Registering [Fig. 5] weback ID.
4. Operate your PUCRC660 via APP Tap the device area [Fig. 10] to enter APP main interface. From this interface you can choose different cleaning modes, also to check the cleaning process/status. Tap DIRECTION KEY [Fig. 11] to enter Direction Control Panel [Fig. 12] 5. Share your EXVAC660 You may share your PUCRC660 with your family members. Please be sure that they have registered weback ID already. Tap MANAGE DEVICE MEMBERS [Fig. 13], add your family member's ID/Cellphone number [Fig.
6. Connect to ALEXA (Amazon Echo) or other third-party APPs/Programs. Please make sure you have registered Amazon ID and with your Amazon Echo ready before connection. A. Tap ME [Fig. 15] on your weback APP, and choose Third-party Connection [Fig.15] B. Enter the interface of adding third-party APPs/programs [Fig. 16] C. Follow instructions step by step to connect your PUCRC660 with Amazon Echo/Siri. [Fig.
Before using this product, please read the safety instructions below and follow all the routine safety precautions. Please read the Instructions carefully and keep them for future reference. Any operation that does not conform to the Instructions may cause damage to the product. Safety Considerations of Main Body and Accessories WARNING 1. Do not disassemble, repair or refit the product without authorization; otherwise it may damage the product or pose a hazard. 2.
. Please clean the product after charging. 7. Please turn off the power switch on the side of the robot when the product is out of service for a long time. 8. Please check carefully to see if the power adapter is connected to the socket prior to use, to avoid damage to the robot. 9. Before using the product, please remove all vulnerable items on the floor, such as glass, lamps, and items such as wires and curtains that may entangle with the side brush and suction passages. 10.
WARNING 1. When skin or clothing is exposed to the battery electrolyte, immediately wash with clean water to avoid inflammation of skin etc. 2. Do not use the rechargeable battery on other devices. This battery is only suitable for PUCRC660 sweeping robots. 3. If the battery's outer box is found to be deformed and expanded, or leakage of electrolytes is found, do not charge or continue to use to avoid danger. 4.
1. Take out two screws on the battery cover with a screw driver. 2. Take out the battery cover. 3. Take out the battery and unplug the electric wires to remove the battery. Names of Parts While the accessories provided for some models are slightly different, they are subject to the actual product. 8 www.PyleUSA.
Main Body 1. Bumper 2. Control Button Main Body 1. Universal wheel 2. Charging shrapnel 3. Side brush 5. Cincture 6. Rolling brush components 7. Dust box 4. Battery cover Main Body 1. DC power jack 2. Power switch 3. Dust box release button 9 www.PyleUSA.
Dust Box 1. Pre-filter 2. High-effective filter 5. Dust box cover 3.Filter sponge 4.Dust box Charging Base 1. Charging indicator 2. DC power jack 3. Charging terminal Product Characteristics Humanized Design It is simple to operate. You can control the robot only by pressing the Control button! Follow the prompt tone to operate the robot! 10 www.PyleUSA.
Dust box can be washed with water The dust box and the pre-filter can be directly flushed with water without too much labor, which can avoid secondary pollution caused by dust flying! Remote Control Instructions Mop function only available with purchase of Mopping Attachment Kit -Pure Clean Model: PRTPUCRC6605 (Sold Separately) PRTPUCRC6605 model only (Sold Separately) 11 www.PyleUSA.
When the robot is in the vicinity of the charging base and the virtual protection wall, it may not be able to distinguish the instructions issued by the remote control. If you do not use the remote control for a long time, please remove the battery. Auto Cleaning button In any cleaning mode, press this button to enter the auto Cleaning mode. Auto Charging Press this button to enter the auto charging mode, and the screen displays of remote control.
Single Room Cleaning Button Press this button to enter the Single Room Cleaning Model. Preset Button In the standby mode, press this button to enter the presetting mode, and the display flashes icon . In the preset mode, press this button to save the data and exit the preset mode, and the display will always display the icon . In the preset mode, press the preset button for 3S to cancel the preset function, and the displayed icon will disappear.
Switch on the robot, which makes the Control button green, and enter the Select mode. If the robot is not activated within 3 minutes, the robot will enter Sleep mode. Charging Mode In any mode, select the Return for Auto Charging button on the remote control to make the robot return for charging. Auto Charging When cleaning is completed or the battery is too low, the robot will automatically start finding the charging base to charge itself.
Switching Modes Startup 1. Make sure the power switch on the side of the robot is turned ON. 2. Press the Control button or the Cleaning mode on the remote control to start the robot. Pause The pause function is to switch the robot from the operating mode to the selected mode, and the robot can be paused by the following operations: 1. Press the Control button on the robot to pause the robot. 2. Press the power ON/OFF button on the remote control to pause the robot.
Charging Instructions 1. The battery should be repaired and replaced by the aftersales department. 2. For the very first operation,please let the robot run out of power. 3. When the robot is charged, the Control button will flash a green lamp in a circular manner. 4. If the robot is out of service for a long time, please turn off the power switch. 5. Please charge the robot as soon as possible after the battery is used up. 6. The product can only use the power adapter and charger provided by the factory. 7.
Press the "Preset" button to set the robot's scheduled cleaning time. (e.g. Set the robot to 6:30am in the standby mode, the machine will start cleaning at 6:30 am every day). • At the preset cleaning mode, all operations will be prompted to confirm. 1. Press the Preset button so that the robot enters the Preset mode and set the preset time on the remote control. 2. After setting is completed, press the Power ON/OFF button or Preset button to complete the setting of Preset.
Single Room Cleaning The Robot will perform Zigzag Cleaning according to the room environment. It will go back to the starting point and cover all to-be-cleaned areas. Side Brush Cleaning and Replacement Check the side brush's condition frequently to see if it has been damaged or entangled with other objects. Clean the side brush with a cleaning tool or cloth. When the side brush is damaged and cannot be used, please replace it as soon as possible. Land R correspond to each other.
Dump all debris from the dust box into the garbage. Remove the pre-filter Open the high-efficient net cover, and remove the high-efficient filter and filter sponge. It is not recommended to wash the high-efficient filter with water. Please pat off the debris carefully. 19 www.PyleUSA.
Wash the dust box and Pre-filter 1. Dry the dust box and filter components. Keep them dry to ensure a longer service life. 2. After the pre-filter is used for 15-30 days, it should be washed once. 3. The maximum service life of the high-efficient filter is 3 months 1. Reinstall the pre-filter and high-efficient filter in the dust box. 2. Before installing the filter, make sure that the high-efficient filter and the pre-filter are dry. 3.
Cover the dust box and attach it to the main body. Maintenance of Rolling Brush Components Open the rolling brush components. Remove the rolling brush shaft and clean off any debris and hair. 21 www.PyleUSA.
Maintenance of Other Components Use the cleaning tools or a dry soft cloth to periodically clean the charging plate of robot chassis and the sensor window. Use a cleaning tool or soft cloth to clean the charging base terminal. 22 www.PyleUSA.
Water Tank / Mopping Feature Operation Mop function only available with purchase of Mopping Attachment Kit -Pure Clean Model: PRTPUCRC6605 (Sold Separately) Cover the dust box and attach it to the main body Exchange water tank with dust box Take out mopping cloth and stick it properly on water tank bottom. Fill water tank with water, and then take out the dust box, place water tank on the robot, the robot says “Wet Mopping Mode”, you can mop your floor now. 23 www.PyleUSA.
Replaceable Modules Range of Application: The product is suitable for cleaning houses, hotel rooms, and small offices and provides good cleaning for various carpets (with carpet wool length less than 0.8 inch), wooden floors, hard floors, floor tiles, etc. 24 www.PyleUSA.
Common Faults FAULTS POSSIBLE REASONS SOLUTIONS 1. The electrodes between the 1. Make sure that the electrodes between the main body and main body and the charging the charging base are properly base are not contacted properly. contacted. 2. The charginbase is switched off 2. Keep charging the robot when it is not working to better while the ro ot is switched on, prepare for next cleaning which leads to the loss of power. assignment.
PUCRC660 Smart Robot Vacuum Cleaner Robot Cleaning Vacuum with App Control and Remote Control Features: • • • • • • • • • • • • • • • • Keep it Clean: Sweep, Dust & Vacuum Versatile & Convenient Floor Clean Ability Smart, Self-Programmed Cleaning Path Navigation Features Gyroscope Technology to Optimize Cleaning Routes Preset Multi-Clean Modes: Zigzag, Spot, Edge Super Slim Low-Profile Housing Slides Underneath Furniture Take Control of the Vacuum with the Included Remote or via APP Built-in Rechargeable
What’s in the Box: • Smart Robot Vacuum • Dock Charging Base • Removable Dust Bin • (4) Sweep Brushes • (2) HEPA Filters • Remote Control • Cleaning Brush Technical Specs: • Cleaning Area Coverage: 120-180 Sq. Meter • Water Tank: 350 mL • Waste Bin Capacity: 600 mL • Noise Level: <65dB • Construction Material: Engineered ABS Housing • Battery Operated Remote, Requires (2) x ‘AAA’, Not Included • Robot Vac Rechargeable Battery: 2600mAh Li-ion, 14.
