Model: PVNT7U Retro Style Turntable With USB-to-PC Connection 1600 63rd Street Brooklyn, NY 11204 Toll Free: (800) 444-5671 / Tel: (718) 236-8000 / Fax: (718) 236-2400 http://www.pyleaudio.
IMPORTANT SAFETY INSTRUCTIONS When using electrical products, always follow basic precautions: 1. Read Instructions-All safety and operating instructions should be read before operated. 2. Retain Instructions-Safety and operating instructions should be retained for future reference. 3. Follow warnings-All warnings on the product and in the manual should be adhered to. 4. Follow instructions-All operating and user instructions should be followed. 5.
17. a. b. c. d. e. 18. 19. 20. 21. service personnel. Damage requiring service-Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: If the power-supply cord or plug is damaged. If liquid or objects have fallen into the product If the product has been exposed to rain or water. If the product does not operate and you have followed the manual for troubleshooting.
BEFORE USE 1. Choose a safe location and avoid placing the unit in direct sunlight or near heat source. 2. Avoid locations subject to vibrations, excessive dust, cold or moisture. 3. Do not open the cabinet as this may result in electrical shock. If a foreign object is inserted accidentally contact your dealer. 4. When removing the power plug from a wall outlet, pull the plug directly, Not the cord. 5. Do not attempt to clean the unit with chemical solvents as this might damage the finishing.
PLAY A RECORD 1. Raise the dustcover 2. Connect the AC power cord to an electrical outlet(120V-60Hz) 3. Place a record on the turntable and set the player speed to match the record speed (33/45/78). NOTE: when playing a single (a 45 rpm record) and/or records with large centre holes, use the 45 rpm adapter. 3. Remove the tone arm from the rest, push lift lever backward to raise the tone arm and gently move the tone arm to the desired position over the record.
RECORD YOUR VINYL TO YOUR WINDOWS PC Audacity Recording Software Your USB turntable is compatible with any recording software that supports USB Audio devices. We have included Audacity, which is free software, distributed under the General Public License (GPL), However you may prefer to use a variety of 3rd party software packages.
Figure 1: Select USB Audio Device from Preferences 3. Play through the entire track/album you desire to record. 4. Press Stop 5. SAVE YOUR FILE NOW by clicking on ‘File’ -> ‘Save Project’. Select the destination and file name for the project and click ‘Save’. 6. You have completed the recording process. (See Figure 2) Figure 2: Recording Sample Adjusting Your Audio Level (Optional) 1. Select your entire recording by selecting “Edit”, then “Select…”, then click “All”.
section as well as on the web (See Figure 4). b. Normalize should be used to have the correct volume on the recording. (See Figure 5) Figure 4: Effect Drop Down List Figure 5: Normalize Cleaning Your Audio (Optional) 1. Drag the cursor over a portion of the audio track which contains noise. We recommend using the beginning or the end of a track where there is no music and only noise. (See Figure 6) 2.
Removal” window. (See Figure 7) 3. Click “Get Noise Profile”. The Noise Removal window will now close automatically. 4. Select the entire track of audio you wish to remove noise from. If you wish to clean up the entire recording, use “Select All” under the “Edit Menu” (See Figure 3) 5. Repeat Step 2 to bring up the “Noise Removal” Window. 6. Adjust the amount of audio that you would like to filter by moving the slider in the “Noise Removal” window.
TIPS FOR BETTER TURNTABLE PERFORMANCE 1. When opening or closing the turntable cover, handle it gently, gripping it either at the centre or at each side. 2. Do not touch the needle tip with your fingers; avoid bumping the needle against the turntable platter or record edge. 3. Frequently clean the needle tip-use a soft brush in a “back-to-front’motion only. 4. If you must use a needle cleaning fluid, use very sparingly. 5. Gently wipe the dust cover and turntable housing with a soft cloth.