User's Manual

Basic Operation
Press and hold the PLAY/PAUSE key more than
2secs., and the red indicator will flash for one time,
the “ ”, “ ”, “ ” will show on LCD one after
another, then enter into the Voice mode as right photo.
Press PLAY/PAUSE key more than 2secs., and the
“ ” shows on LCD, then the LCD goes out, the unit
is turned off.
“ ” means 4969MB(4GB) built-in memory in this unit.
Slide the HOLD switch up to set it on, then all keys lose function,
and the “ ” will show for 2secs. when any key is pressed.
* It’s very useful function to avoid error operation while recording or
playing.
Slide the HOLD switch down to set it off, and it will recover all
keys function.
To turn on/off the unit
At Voice mode, you may press VOL+ or VOL- key back and forth to
set the VOR and recording quality mode.
Before recording, you can set the VOR function according as your demand. If it is
turned on and the detected volume doesn’t reach the VOR level value(set by system),
the recording will pause until it detects eligible volume, otherwise it will continue recording
soundless section in this file .
VOR and recording quality mode
HOLD function
VOR off VOR on good recording
quality
better recording
quality. *It’ll occupy
bigger space than
LP mode.