User Manual

12. Microphone input: Microphone input jack

13. LINE IN: External sound source input port (plug-and-play).

14. Reverberation: Microphone reverberation regulating knob.

15. Microphone volume: Microphone volume regulating knob.

16. DC 12V recharging: DC 12V recharging port.

17. LED Power: The ON/OFF button of light

18. : In MP3 mode, Long press it to toggle between 6 kinds of ash modes/ the ash

light switch. In FM/MIC IN mode, Long press to control the ash light switch.

19. Power switch: “

” - ON; “ ” - OFF.

20. TREBLE: The control knob of treble.

21. BASS: The control knob of bass

22. LED MODE 1: First lighting mode

23. LED MODE 2: Second Lighting mode

24. IR: Infrared remote receiver module

NOTE:

Please be sure to charge if music becomes distorted.

V. REMOTE INSTRUCTIONS:

1. Power Button: Short press it to enter standby mode; short press it again to resume. If

no device is connected, the system goes to “-NO-”.

: Functions as “ ” on the master device.

5. Mode: Functions as “Mode” on the master device.

6. V+/V- Keys: In USB/SDF/FM/AUX mode, press them to volume up/down.

7. Numeric Keys 0~9: In USB/SD card reading status, to play Track 12, just input numbers

“1” and “2”, and in 2 seconds the system will go to Track 12 and start playback. Any

input of number larger than number of the total available tracks is invalid. In FM status,

to listen to channel 107.5MHZ, just input “1075”.

8. Environment Key: In USB/SD card reading status, short press it to toggle among

Square, Meeting, Home, Hall and Personal modes.

9. Sequencing Key: In USB/SD card reading status, short press it to toggle among four

playback sequencing modes (All - play all tracks in sequence; RAND - play in random;

ONE - repeat one track; FOL - repeat all tracks in a folder).

10.

In USB/SD/FM/AUX mode, short press it to mute the device.

11. 100+: Number selection key - in MP3 mode (USB/SD card), short press it to add “100”

to current track number.