User Manual

14. Microphone Volume: Microphone volume regulating knob.
15. Reverberation: Microphone reverberation regulating knob.
16. Microphone Input: Microphone input jack
17. DC 12V Recharging: DC 12V recharging port.
18. : Control the ash light switch.
19. Recharging Indicator Light: When the charger is connected, red light turns
on. When the device is fully charged, blue light turns on.
20. Power Switch: “ ” - ON; “ ” - OFF.
21. TREBLE: The control knob of treble
22. MIC PRIORITY: Connect the microphone, short press microphone priority
mode key.
22. IR: Infrared remote receiver module
V. Operation Instructions on Remote Control
1. Power Button: Short press to enter standby mode; short press it again to
resume. If no device is connected, the system goes to "-NO-".
2. : Functions as “ ” on the master device.
3. : Functions as “ ” on the master device.
4. : Functions as “ ” on the master device.
5. Mode: Functions as “Mode" on the master device.
www.PyleUSA.com
5