TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .................................................................................................... 2 BEFORE USE........................................................................................................................................ 4 COPYRIGHT .............................................................................................. Error! Bookmark not defined. BUTTONS AND CONTROLS .........................................................
8. Do not block any ventilation openings. The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains and the like. 9. Install the apparatus in accordance with the manufacturer’s instructions. 10. Clean the cabinet with a soft cloth slightly moistened with a mild detergent solution. Do not use strong solvents which may cause unpredictable damage to the apparatus. 11.
1. Use of controls and adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 2. If this product develops trouble, contact qualified service centers, and do not use the product in defective states. BEFORE USE 1. Choose unit installation location carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, cold or moisture.
USB CHARGING The apparatus can be charged by some devices that have USB socket. Before using, you’d better charge your speaker first. 1. Plug the USB cable into the USB socket of the apparatus and plug the other end of USB cable into the USB socket of the computer or other devices that have the USB socket; 2. Commonly, it will take 3 hours to charge the apparatus. USB Charge voltage is 5V. Note˖The indicator will light red when charging. When the apparatus is fully charged, the indicator won’t light.
rising tune and the indicator will stop flashing. GETTING CONNECTED USING NFC 1. If your device supports NFC, switch NFC on. 2. Touch the NFC area of the speaker with the NFC area of your device. When the NFC connection is success, the indicator will stop flashing. 3. To close the connection, touch the NFC area of the speaker with the NFC area of your device again and the indicator will start flashing. Note: Some device may ask for confirmation on connection. For details on NFC, see your device user guide.
SPECIFICATIONS AMPLIFIER section Output Power Frequency Response SPEAKER SYSTEM section Type Impedance …………. …………. 1-way 4 Ohm Output Power …………. 2x3.0w GENERAL Power Requirements …………. Dimensions (W x H x D) …………. USB Charge Standard Accessories …………. …………. The built-in lithium battery voltage 3.7V Lithium battery capacity:1400mA 2.6" x 2.7" x 7.9" inches Without hand buckle 2.6: x2.7" x 8.5" inches With hand buckle USB charge voltage 5V USB Cable AUX IN Cable …………. …………. 2.