User Manual

ManualsBrandsPyle ManualsHeadphonesCompact Monitor Headphone Amplifier, +48V Phantom Power Pass

Table Of Contents

USER MANUAL

MODEL:PHA211

www. PyleAudio. com

Specifications

Input Impedance 100K- ohm, Unbalanced

Max Input Level +15dBu

Input connector Stereo 1/4"TRS Jack

Output Impedance 80- Ohm Each

Max Output Level 40mW in 100ohm

Max Gain 20dB/Channel

S/N Ratio More than 90dB

THD Less than 0.03%

Power Requirement 12V DC/150mA

Dimension WxHxD 4. 07" x 1.18"2. 24"

Weight (LBS) 0.42LBS

ULTRA-CO M PACT M O NITOR HE A DPHONE A M P LIFIER

Summary of content (4 pages)

PAGE 1
Specifications 100K-ohm, Unbalanced Max Input Level +15dBu Input connector Stereo 1/4"TRS Jack Output Impedance 80-Ohm Each Max Output Level 40mW in 100ohm Max Gain 20dB/Channel S/N Ratio More than 90dB THD Less than 0.03% Power Requirement 12V DC/150mA Dimension WxHxD 4.07" x 1.18"2.24" Weight (LBS) 0.42LBS www.PyleAudio.
PAGE 2
FEATURES AND CONTROLS 1 2 6 7 3 8 9 1 FEATURES AND CONTROLS 4 10 5 1. DC 12V/150mA POWER SUPPLY IN To Connect the Power Supply with DC 12V/150mA. 2./3.MIC FEMALE/MALE XLR INPUTS 4. GND/LIFT PUSH TYPE SWITCH 5. 1/4” TRS MONITOR INPUT 6. POWER ON LED INDICATOR The Indicator Lights When the Power Supply is Connected to Switch On 7. PHONES INPUTS High-power Headphone Output on 1/4” and 1/8” Jack Input Connectors 8. MONO/STEREO PUSH TYPE SWITCH 9. MIC OUTPUT VOLUME CONTROL 10.
PAGE 3
.Stereo Monitor Input with Dedicated Monitor Level Control and Mono/ Stereo Switch .High-power Headphone Output on 1/4" and 1/8" Jack Connectors .DC 12V Adapter Included CONNECTIONS INSTRUCTION: PYLE MIXER CONNECTION DIAGRAM 1/4” TRS PLUGS NI CD The PHA211 features XLR Through Jacks and Provides Super NoiseFree Operation. Just Connect to the Mic Input and Send a Line from the Microphone Through to Your Main Mixer.
PAGE 4
IMPORTANT SAFETY INSTRUCTIONS 1. Read Instructions -All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions -The safety and operating instructions should be retained for future reference. 3. Head Warnings -All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions -All operating and use instructions should be followed. 5.