Manualshelf

User Manual

ManualsBrandsPyle ManualsReceiver & Speaker KitsBluetooth Marine Receiver Stereo & Speaker Kit, Hands-Free Calling, Wireless Streaming, MP3/USB/SD Readers, AM/FM Radio, (2) 5.25" Waterproof Speakers (Black)
12345678910
- 9 -
USB / SD CARD OPERATION
To insert USB / SD CARD
噝 To play files on a USB device, open the USB port cover and insert the USB storage device into the
USB port. Playback will begin automatically.
噝 Insert an micro SD card into the micro SD slot. Playback will begin automatically.
Eject USB/SD
噝 To eject a USB device, press the button to stop playback, then remove the USB device.
噝 To eject an SD card, press the button to stop playback, and puss the SD card in the slot, then
remove the micro SD card from the micro SD card slot.
Play/Pause
Press the (play/pause) button to pause or resume playback.
Next/Previous Track
To play the next track, press the button. To play the previous track, press the button.
Fast Forward/Backward
To fast forward, press and hold the button. To fast backward, press and hold the button.
Introduction Scan
Press the INT button to play the first 10 seconds of each track, press again to stop the introduction scan,
and play the current track.
Repeat The Same Track
Press the RPT button to repeat the current track. Press again to stop repeat playback and resume normal
playback.
Playing all tracks in random
Press the RDM button to play all tracks in random order, press again to cancel this function.
Track/Folder Navigation
噝 In USB or SD card mode, press the 5/-10 button to go backward 10 tracks.
Press the 6/+10 button to jump forward 10 tracks.
噝 In MP3, USB or SD card mode, press and hold the 5/-10 button to go back the previous folder.
Press and hold the 6/+10 button to go to the next folder.
Repeat this function depending on the number and level of folders.
噝 These buttons have no this function if the USB device or SD card has no folders.
Select the track or file for playback in MP3 format
Press and hold the AMS button to direct select a music file. The “TRK0000” will appear on the display.
Turn the volume control to select the “first number”. Then press the button to move the “first
number” to the left and enter the next number. When the desired track number appears, confirm your
selection by pressing SEL button.
AUXILIARY INPUT OPERATION
This receiver is equipped with an external auxiliary input jack (3.5mm) on the front panel which is
compatible with audio output from an MP3 music player.
Plug such a player into the AUX IN jack with a 3.5mm stereo audio cable and press the MODE button to
switch to AUX input mode. “AUX IN” appears in the display.Listen to music from an external device
through the speaker.
Note:
Adjust the volume of the external device to a comfortable level with the receiver volume control.