User Manual

Play / Pause

Press Hold = On/Off

Previous Song

Volume Down

Next Song

Volume Up

Bluetooth Pairing and Connection:

1. Connect Bluetooth controller box to your device

2. Press and Hold for three seconds until power indicator lights (red)

3. The system will automatically go into pairing mode The power indicator will turn red

for about 7 seconds and then alternating red and blue (Bluetooth blue Power red) Please

be sure that Bluetooth is turned on your device Select “PYLE PLMRKT9 ”

on your device to

connect Bluetooth controller(if the Bluetooth controller is connected the light will turn

blue and not ash)

4. When the device is out of Bluetooth range, Bluetooth will be disconnected automatically

and automatically reconnect when detected in range again.(If not please just repeat

steps1 and 2)

When Bluetooth is disconnected or the 3.5mm AUX Input is plugged in, the power

indicator will glw red.

Playing Music:

1. Press to start or pause the music

2. Press for next track

3. Press for previous track

4. Press VOL+ for volume up

5. Press VOL- for volume down

Bluetooth Installation

Size:

(Out Diameter)

(Cutout Diameter)

(Depth)

100mm

78.8mm

37.9mm

Seamless Flush Mount