User Manual
www.PyleUSA.com
6
39. Channel -2 USB/SD Record and Replay button
40. Repeat Channel -2 USB/SD song
41. Sound Eects selection
42. USB2 volume control
43. Power Switch and DC 13.5V 2A input: Use adapter for charging.
Multi-Receiver Connection:
If you have purchased additional PRTPMX6BURC receiver units, follow the
below steps to connect additional speakers to your audio setup:
Connecting Additional Receivers / Speakers to the PMX6BU - DJ Sound FX
Audio Mixer System…
1. Designate one receiver to act as the ‘MAIN RECEIVER’ -- and place it to
the side.
2. Press the ‘POWER’ button on all additional receiver units you are
attempting to connect (the ‘EMIT’ indicator lights will blink).
3. While the ‘EMIT’ indicator is blinking, press the ‘5.8G/BT’ button (the
‘EMIT’ indicator light will stop blinking and the ‘RXD’ indicator light will
remain solid).
4. While the ‘RXD’ indicator light remains solid, press and hold the ‘5.8G/BT’
button for ~ 5 seconds (or until the ‘EMIT’ indicator blinks red).
5. While the ‘EMIT’ indicators blink red on all additional receiver units, press
the ‘POWER’ button on the designated ‘MAIN RECEIVER’
(the ‘EMIT’ indicator will blink).
Important Note:
Use the 'Match Code' function button (located at the back of the
mixer unit) upon your rst time connecting / pairing any wireless
audio receiver units.
The Match Code function will prevent the interference of any
outside/external audio signals.