User Manual

www.PyleUSA.com
7
6. While the ‘EMIT’ indicator blinks on the ‘MAIN RECEIVER’, press and hold
the ‘5.8G/BT’ button for ~ 5 seconds (or until the ‘EMIT’ indicator blinks red).
7. Wait for the indicator lights on the additional receiver units to stop
blinking -- this ensures they are successfully paired (however, the ‘MAIN
RECEIVER’ indicator lights will continue to blink).
8. While only the indicator light on the ‘MAIN RECEIVER’ is blinking, it’s
time to connect via Bluetooth. Goto your device’s Bluetooth network list
and get connected (upon successful Bluetooth connection, the ‘MAIN
RECEIVER’ indicator light will remain lit).
9. Stream some sound! The ‘MAIN RECEIVER’ will deliver the wireless audio
to any paired additional receiver units. Ensure all receiver units are
connected to a compatible speaker with the audio connection cables via
the ‘AUX OUTPUT’.
Notes:
* Pyle Model: PMX6BU - DJ Sound FX Audio Mixer, sold separately.
* When pairing the system, ensure both the mixer and wireless receiver(s)
are within range to initiate a successful wireless pairing sequence.
* Ensure you are using a compatible speaker system with Aux audio line-in
mode is activated on the connected speaker.
• Battery Charging:
When the battery is low, power indicator will ash on the receiver. Charge
the DJ Sound FX Mixer or receiver immediately. For DJ Sound FX Mixer,
use the 13.5V 2A adapter to charge the unit. Red LED indicator will be ON,
when fully charged it will turn to green.
For the Mixer, use our adapter to charge the unit.
Red LED indicator will be ON, when fully charged it will turn to blue.
For the receiver, use our cable and your smartphone adapter for
charging. Red LED will be ON, after fully charged it will turn to blue.