OPERATION MANUAL Professional Manufacturer And Globel Leader For Money Counter And Counterfeit Detector
CONTENT 1.Illustration -------------------------------------------------------------------------------------2.G eneral instruction .---------------------------------------------------------------------------3.Safety instructions--------------------------------------------------------------------------4.Power up--------------------------------------------------------------------------------------5.Counting function----------------------------------------------------------------------------6.
Fully Fully A u t o m a t ic Suitable for both new,old,dirty,tattered polymer bills and paper bills m oney c ounter 1. Illustration Rotary LCD screen or LED screen A u t o m a t ic m oney c ounter Suitable for both new,old,dirty,tattered polymer bills and paper bills 2.General instruction Hopper Control panel Handle Frontal platform Exiting roller Counting sensor On the basis of all our former models of banknote counter, we designed and developed this new model.
Fully Fully A u t o m a t ic m oney c ounter Suitable for both new,old,dirty,tattered polymer bills and paper bills Instead. -Bills should be correctly placed as indicated in the following steps: Place the bills between the counting guides as shown in the figure 1, then push the bills backward to make them lay on the top of the hopper plate, in the correct counting position as shown in the figure 2. Figure 1. Put the bills by this direction Figure 2. Push the bills backward.
Fully Fully A u t o m a t ic m oney c ounter Suitable for both new,old,dirty,tattered polymer bills and paper bills “SE7/25”then press“+”“-”buttons to choose the desired Sensitivity level (range from 0-255). After choosing of the level, press “RESET”button to confirm. .
Fully Fully A u t o m a t ic m oney c ounter Suitable for both new,old,dirty,tattered polymer bills and paper bills A u t o m a t ic m oney c ounter Suitable for both new,old,dirty,tattered polymer bills and paper bills 10.Counting roller replacement 12.Specification When the counting roller damaged, it will cause counting not fluently or correct. Open the top cover, loosing the screw of roller axis machine. Replaced old roller. Then fix the machine inside.
