BILL COUNTER FRONT LOADING MONEY COUNTER OPERATION MANUAL PRMC820 User Manual High Quality And Leading Article In The Bill Counter World BILL COUNTER OPERATION MANUAL
CONTENT 1.Name and Brief Description of Main Parts......................................................................1 2.Operation Panel and Display....................................................................................2-3 3.Notes in Using Machine........................................................................................... 3 4.How to Operate Machine...........................................................................................4-5 5.
HIGH QUALITY AND LEADING ARTICLE IN THE HIGH QUALITY AND LEADING ARTICLE IN THE BILL COUNTER BILL COUNTER 1.Name and Brief Description of Main Parts 2.Operation Panel and Display Handle 13 12 6 4 5 3 2 1 Controls panel Auto start sensor Feeding roller 4. IR KEY Press the CF key, then press this key, the machine will stop in case a chain note is detected. Impeller ADD Stacker AU T O Preset sensor 11 10 9 8 7 Preset sensor 1.
HIGH QUALITY AND LEADING ARTICLE IN THE HIGH QUALITY AND LEADING ARTICLE IN THE BILL COUNTER BILL COUNTER 2.Operation Panel and Display 3.Notes in Using Machine 8. BATCH KEY Every time this key is pressed, one of the preset batch amounts 10, 20,25,50,100 and infinity will be displayed and selected by rotation on the Batch Number Display. ---Avoid operation under direct sunlight. 9.
HIGH QUALITY AND LEADING ARTICLE IN THE HIGH QUALITY AND LEADING ARTICLE IN THE BILL COUNTER BILL COUNTER 4.how to Operate Machine 5.Different Denomination Detection Function 4).Set the counting speed. Set the counting speed by pressing the SPEED Key. Every time this key is pressed, one of the preset rates “600”,“1000”, “1200”,“1900” notes/min will be displayed by rotation on the Counting Number Display.
HIGH QUALITY AND LEADING ARTICLE IN THE HIGH QUALITY AND LEADING ARTICLE IN THE BILL COUNTER BILL COUNTER 5.Different Dimensions Detect Function 5.Different Dimensions Detect Function Activating the CF (counterfeit note) detect function 1. Press the CF key to activate the counterfeit note detection function.CF SET will be displayed on the display.
HIGH QUALITY AND LEADING ARTICLE IN THE HIGH QUALITY AND LEADING ARTICLE IN THE BILL COUNTER BILL COUNTER 5.Different Dimensions Detect Function 5.Different Dimensions Detect Function IR(infra-ed) detection function *Available for the model with UV&MG&IR detection,
HIGH QUALITY AND LEADING ARTICLE IN THE HIGH QUALITY AND LEADING ARTICLE IN THE BILL COUNTER BILL COUNTER 6.Error message and solution 7.Trouble shooting The batch display may shows some error message when counting, which means there are some problems with the machine. Refer to the following diagram to find way to solve it. When an error occurs, its corresponding error code is displayedon the Batch Number Display.
HIGH QUALITY AND LEADING ARTICLE IN THE HIGH QUALITY AND LEADING ARTICLE IN THE BILL COUNTER BILL COUNTER 8.Precations for Handling of Machine 7.Trouble shooting Error code 0 1 Type of error Cause of error Procedure for the removing the cause of the error Different size notes are mixed. Check the last note in the Stacker. Abnormal notes are mixed Check all notes in the Stacker, and then set them again. Different size notes are mixed.
HIGH QUALITY AND LEADING ARTICLE IN THE HIGH QUALITY AND LEADING ARTICLE IN THE BILL COUNTER BILL COUNTER 9.Daily cleaning of the machine 10.Specifications ---Sensors are used for counting system of this machine. As these sensors are of optical construction, the system may cause miscounting should dust, dirt, etc.Stick to the sensors.Clean the sensors shown on the photo below with an accessory brush when counting operation is finished.
