User Manual

9.Daily cleaning of the machine
Length sensor
Counting sensor
Auto start sensor
Preset sensor
-
should dust, dirt, etc.Stick to the sensors.Clean the sensors shown on the photo below with an accessory brush when counting operation
is finished.
---Piece of paper, dust and/or trash etc. Accumulated in the Hopper and/or stacker may be taken into the machine; this may cause a
malfunction of the machine. Clean the Hopper and Stacker in the same way as above.
--Sensors are used for counting system of this machine. As these sensors are of optical construction, the system may cause miscounting
15
HIGH QUALITY AND LEADING ARTICLE IN THE
BILL COUNTER
11.Caution
Clean the machine after turn off the power switch.
* Do not use chemical for cleaning the machine.
*
* Dimensions 242mm×276mm×245mm
* Net Weight… … … … … ……… …… 4.9kgs/pc
* Gross Weight… … … … ……… …… 6.75kgs/pc
* Size of countable note… … …………50mm×110mm ~90mm×190mm
* Counting speed … … … ……… ……1900, 1200, 1000, 600 pcs/min.
(Four step system)
* Feed system… … … … … …………Roller friction system
* Hopper capacity… … … … …………300 sheets
* Stacker capacity… … … … …………200 sheets
* Counting number display… …………5 Digital LCD
* Power source… … … … … …………AC100~240V 50/60Hz
* Power consumption… … … …………60W(max)
… … … … … ……………
10.Specifications
16
BILL COUNTER
HIGH QUALITY AND LEADING ARTICLE IN THE