User Manual

8
Charging for Mobile Devices
Turn the Projector On/Off
Push the switch towards the left for
3 seconds to turn the projector On/Off.
Power Indicator
Blue: Full
Green: Normal
Red: Low
Brightness Mode
A quick push of the switch towards the left will allow
you to switch freely between the standard mode and
brightness mode.
The internal battery can not only be used
for projection, but also can charge your
phone. Push the power switch to the right
in order to reach the charging mode. Plug
one end of the USB cable to the projector;
the other end goes into your smartphone.
(Note: Power charging for tablet is unavailable)
Note: Under Wireless Display Mode, the brightness can
not be adjusted. You can adjust it under the other modes, and then switch it back to Wireless Display.
USB 5V 500mA