User Manual

12
PREPARATION
How to Install the Projector Using a Tripod
如下所示，您可以把投影机安装在摄像机三脚架上。
稳定三角架时，建议使用 4.5 mm 标准尺寸或更小的锁紧螺栓。 锁紧螺栓的最大允许
尺寸是 5.5 mm。 （如果比最大允许尺寸长，有可能损坏投影机。）
+
The projectors is connected
Triod
This is the bolt
Bottom side of the projector
＝
﹥
39
CUSTOMIZING SETTINGS
SETUP Menu
1
2
3
-
4
5
The available option settings are described as follows.
Setting
Description
Language
Initial settings
Selects a desired Menu Language.
Resets all the projector settings to the factory default.
Selects menu transparency
Selects menu disappear time
Projector software update (USB)
S
Setting
You can install this projector using a camera tripod.
As shown below, you can mount the projector instead of a camera on the tripod.
When stabilizing the tripod, we recommend using the locking bolt of standard size 4.5
mm or less. The maximum size allowed for the locking bolt is 5.5 mm. (If it is longer
than the maximum allowed size, it may damage the projector.)
To this part
To fix the projector
Press the Setting button.
Use the or button to select PICTURE
and press the OK button.
Use the or button to set up a desired
item and press the OK button.
-To return to the previous menu, press the MENU
button.
When you are fi nished, press EXIT.
Use the or button to adjust the settings.
Menu Transparency
Menu disappear time
Software update(USB)
Menu Language
Initial settings
Menu transparency
Menu disappear time
Software update (USB)
•
•