User Manual

Input Source
AV
YPbPr
HDMI1
HDMI2
PC-RGB
ANDROID
17
Using the PROJECTOR
Using the Input List
Using the Input List
1
2
KEYSTONE
0
MENU
34
CUSTOMIZING SETTINGS
PICTURE SETTING
The available picture settings are described as follows.
Setting Description
Picture
Picture mode
Vivid
Standard
Has the contrast, brightness and sharpness at normal levels.
Soft
Optimizes the image for movie.
Expert
Adjusts the detailed image settings.
Adjusts the detailed image settings.
CONTRAST
BRIGHTNESS
Sharpness
Adjusts the level of sharpness in the edge between the light and dark
areas of the picture. The lower the level is, the softer the image looks.
COLOR
Adjusts the intensity of all colors.
Adjust the intensity of the red
Adjust the intensity of the green
Adjust the intensity of the blue
Tint
Adjusts the balance between red and green levels.
Color -Tem
Zoom mode
COOL COLOR
EXERT
Blue
STANDARD
Red
Adjust image’s size ( see page 18 about Adjusting Aspect Ratio)
WARM COLOR
Green
Pic ture mo de cust omizi ng
Color temperature
Zoom Mode
Nois e re ducti on
Flip Horizontal
flip vertical
KEYSTONE
Energy savi ng
Auto key stone
Computer setting
PICTURE
Using the Keystone
Function
To prevent the screen image from
becoming trapezoidal, Keystone adjusts
the top and bottom width of the image
if the projector is not set at a right angle
to the screen.
Because the Keystone function may
cause inferior screen image quality, use
this function only when it is not possible
to set up the projector at an optimal
angle.
1 Press the Key's ▲ or Key's ▼button
to adjust the screen.
-Keystone can be adjusted from -40
to 40.
2 Press the MENU or EXIT button after adjustment
Press the INPUT or S button to access
the input sources.
- The connected input mode appears
first.
Select an input signal using the INPUT OR S
button and the projector is switched
only to the connected input mode. You
can use the OK button to
switch into connected input modes.
1. Press the MENU button.
2. Use the or button to select Picture
3. Use the or button to set up a desired
item and press the OK button.
-To return to the previous menu, press the
button.
4. When you are fi nished, press EXIT.
mode
Selects one of the preset images or customizes options in each mode
for the best screen performance.
You are also able to customize advanced options of each mode.
Maximizes the visual effect of video. Displays a crystal clear picture
by enhancing contrast, brightness, and sharpness.
Increases or decreases the gradient of the video signal.
Adjusts the base level of the video signal to make the image brighter or
darker.
Perature
3
Android Access
Select the input signal source"Android",
and press "OK" button to access Android.
Input Source
AV
YPbPr
HDMI1
HDMI2
PC-RGB
ANDROID