User Manual

32
3D FUNCTION
19
ENTERTAINMENT
Tips for Using USB Devices
Only a USB storage device is recognizable.
USB hubs are not supported.
A USB storage device which uses its
own driver may not be recognized.
The recognition speed of a USB
storage device will depend on each
device.
If a normal USB device does not
work, disconnect and reconnect it.
Please do not turn off the projector
or unplug the USB device when the
connected USB device is working.
The USB device or stored files may
be damaged.
Please do not connect the USB storage
device that has been manipulated
on the PC. The projector may
not operate properly or fail to play
files. Use a USB storage device which
contains normal music, photo, video,
or document files.
Please only use a USB storage device
formatted as a FAT16, FAT32, or
NTFS file system provided by Windows.
In case a storage device formatted
as a different utility program
is not supported by Windows, it may
not be recognized.
Please connect power to a USB storage
device which requires an external
power supply. If not, the device may
not be recognized.
Please connect a USB storage device
with a cable provided by the USB
manufacturer. When you use a cable
that is not provided by a USB manufacturer
or an excessively long cable,
the device may not be recognized.
Some USB devices may not be supported
or will not work properly.
If the length of a folder or file is too
long, the folder or file may not be
recognized properly.
The files in a USB storage device are
sorted in the same way as Windows
XP. Up to 100 English characters for
a file name are allowed.
The data of a USB device may be
damaged, so it is recommended to
backup any important files. Because
a user is responsible for data management,
the manufacturer is not
responsible.
It is recommended to use a USB
memory stick which is 32 GB or less
and a USB hard disk which is 1 TB or
less. Any device with more than the
recommended capacity may not work
properly.
If a USB storage device is not working
properly, disconnect it and connect it
again.
If a USB external hard disk with the
power saving function does not work,
turn the hard disk off and on again to
make it work properly.
USB storage devices below USB 2.0
are supported as well. However, they
may not work properly in the movie
list.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3D Image Playing Method
1. Select the 3D image file name, press the OK button.
2. Before watching 3D of RGB-PC, must button the auto adjust key on the remote control.
3. 3D setting is on page 38.
4. To watch 3D image by projectors, press the button on the glasses.
5. Adjust 3D image settings.
• To return to the general image, press 3D three-dimensional image button.