User Manual

Optional

XFMxx

Crossover

for Shorty

Headers

----------------------------------- PFF13

------------------------------------ PFF10

------------ MVP10 (Standard)

----------------- TFM22

SFM22 / SFM22C

--- PARTS LIST ---

QTY PART# DESCRIPTION

2 PFF10 2.5” Flow Tubes (LH & RH)

2 PFF13 2.5” Flow Tubes Flanges

2 MVP10 2.5” Pro-V Mufflers

(Unless Substituted)

2 TFM22 2.5” Tailpipes (LH & RH)

4 HVC50 2.5” U-Clamps

1 HVC35 Hardware Kit

Popular Options

XFM1x Off-Road X for Shorty Headers

XFM3x Street-Legal X for Shorty Headers

XFM5x Off-Road X for Long Tube Headers

XFM6x Street-Legal X for Long Tube Headers

MVS10 Street-Pro Mufflers (Aggressive)

MVR10 Race-Pro Muffler (Full Flow)

MVT13 Twister Muffler (Radical Sound)

Add a “C” to each

Part# for Ceramic.

Instructions Ver. 1.00

Optional

XFMxx

Crossover

for Long Tube

Headers

PAGE 1
SFM22 / SFM22C --- PARTS LIST --q QTY PART# DESCRIPTION q 2 2 PFF10 PFF13 2.5” Flow Tubes (LH & RH) 2.5” Flow Tubes Flanges q 2 MVP10 2.5” Pro-V Mufflers (Unless Substituted) q 2 TFM22 2.5” Tailpipes (LH & RH) q 4 HVC50 2.
PAGE 2
INSTALLATION INSTRUCTIONS 1. Start by removing your old mufflers and tailpipes. Save your hangers! We recommend an ample dose of WD40 or other brand of penetrating oil to avoid stripping or breaking the bolts at the flange. You will probably have to cut the tailpipe off to remove it. 2. Install the Tailpipes FIRST(figure A/B) and then the mufflers and Flow Tubes without tightening any of the connections.