Item Brochure

SL Series Sleek Shell

ANSI PRODUCT SPEC SHEET

CLEANING INSTRUCTIONS:

Wipe the shell clean with mild soap and water.

Do not clean the suspension, replace when worn or dirty.

Do not use paint, chemicals or solvents as they could reduce the

impact and eletrical properties.

• Ideal for linemen.

• Polyethylene materials.

• Offers impact and penetration resistance.

• Ridgeless low profile design.

• No rain trough- prevents pooling of liquids.

• Ideal for linemen - Exceeds ANSI Type 1, Class E.

• Soft brow pad absorbs perspiration.

• Custom imprinting available on hard hats.

• Testing: Impact, Penetration, Flammability, Electrical

Insulation, Marking & Humidity.

Cap Style

4-Point Ratchet

Part Color

HPS14110•

White

Full Brim

4-Point Ratchet

Part Color

HPS24110•

White

HPS24112• Gray

HPS24160• Blue

SL Series Sleek Shell Hard Hats

Exceeds ANSI Z89.1, Type 1, Class C, G, and E

HPSSUS

Replacement

Suspension Only

PAGE 1
ANSI PRODUCT SPEC SHEET SL Series Sleek Shell SL Series Sleek Shell Hard Hats Exceeds ANSI Z89.1, Type 1, Class C, G, and E • • • • • • • • • CLEANING INSTRUCTIONS: Wipe the shell clean with mild soap and water. Do not clean the suspension, replace when worn or dirty. Do not use paint, chemicals or solvents as they could reduce the impact and eletrical properties. Cap Style 4-Point Ratchet Part HPS14110• Ideal for linemen. Polyethylene materials. Offers impact and penetration resistance.
PAGE 2
ANSI PRODUCT SPEC SHEET SL Series Sleek Shell PACKAGING Case: 12 pcs GENERAL SPECIFICATION General Dimensions: Headband Sizes: Weight: Outer Shell Material: Suspension Strap Material: Accessory Slots: Chin Strap Attachment: Replacement Suspension: Reverse Donning: Rain Trough: Cap Style 5.5” H x 11” L x 8.25” W 6 1/2 - 8” 411 / 14.5oz High Density Polyethylene Nylon No Yes Yes No No Full Brim 6.5” H x 12.25” L x 10.5” W 6 1/2 - 8” 395 / 14oz High Density Polyethylene Nylon No No Yes No No Per ANSI Z89.