DVD Player Operating Instructions PDVD44 NOTES Any change to the design and specifications will not be advised. Before attempting to connect, or operating this product.
Important Precautions The design and manufacture of this player takes personnel safety in to consideration. However, any improper operation may result in electric shock, fire and other hazard. So Please adhere to following precautions. Safety precautions There is dangerous voltage inside this product, do not open the cabinet by yourself to prevent electric shock. Any service please contact professional technician to perform.
DVD features Table of content 1. DVD features 7 8 9 10 Functions of buttons in remote control _ Technical terms _ _ _ _ _ _ _ _ _ _ _ Troubleshooting _ _ _ _ _ _ _ _ _ _ _ Specification _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 20 24 24 25 It provides this multi-media disc player high-resolution image with, high-quality sound and surround sound effect. The DVD player can play not only DVD discs of various versions, but also VCD, SUPER-VCD, DVCD, CD,MP3,etc. Features 1.
Names of parts Names of parts 2. Names of parts 2.3 Remote control 2.1 Front panel 1.POWER ON/OFF 2.DISK SLOT 3.OPEN/CLOSE 4.STOP 2 1 3 1 14 2 15 3 4 5.PAUSE/PLAY 6.BACKWARD 7.FORWARD 16 5 6 17 7 8 18 19 20 9 21 10 4 6 7 5 22 11 23 24 25 26 12 13 2.2 Rear panel 14.TITLE 15.EJECT 16.NUMBER 17.CLEAR 18. REPEAT 19.MUTE 20.SETUP 21.STOP 22.PLAY PAUSE 23.FORWARD 24.BACKWARD 25.NEXT 26.PREVIOUS 1.MENU PBC 2.POWER 3.DISPLAY 4.SUBTITLE 5.SLOW 6.PROGRAM 7.ANGLE 8.AUDIO 9.ENTER/SELECT 10.
Names of parts Preparation before operation 3. Preparation before operation 3.3 Connections 3.1 Unpacking and check Check for the following Accessories: Remote control 1 The video signal is output through s-video or video output terminal, while audio signal is output by mixing channel terminal, coaxial terminal, dts signal is only output through or coaxial terminal. There are many solutions to connect TV and this product, user can select one according to the condition of the apparatus to be connected.
7
Basic operation Basic operation 4. Basic operation If you have connected the product to TV, all power lines have been plugged into receptacles, and loaded the batteries into remote control, so you can play the player. Turn on TV power playback, push [ play ] again to resume Mute (available to analog audio output Signal only) If you have connected amplifier, you should also turn it on, and select proper amplifier mode according to the type of discs to be played.
Frequent operation Frequent operation 5. Frequent operation Play fast backward We will introduce some regular operations of different types of function, the user can perform one or more operations as you like, In addition chapter 7details purposes and operations of all buttons Select menu part to be played with If DVD disc to be played has menu, when PBC. state is on you can display the menu by pushing [MENU/PBC] or [TITLE], whereon you select a popular part to play.
Frequent operation Frequent operation You can push [MENU/PBC] to change PBC state. The player will play orderly as the user Defined. Attention:whether the above procedures work will be subject to the type of disc. Display playing time and state Repeat play Push [DISPLAY] button, TV screen will display current play time state, i.e.
System setting Frequent operation Attention: While playing, you can push [PREVIOUS] or [NEXT] to play the previous track or the next one. While playing you can push [STOP] to back to the menu picture. There are two kinds of file disc play mode:1. No-menu play mode.2. Menu play mode. The factory default play mode of this unit is no-menu play mode. Please refer to the description on [SETUP] setting menu for the information on the switching of play modes.
System setting System setting 2.Push [RIGHT] to enter the sub-menu in the sub-menu in the right screen. If you want to set the screen to "WIDE", firstly push [DOWN] twice to move the high lighting band to "WIDE' item, then push [ENTER], once to move the high lighting band to "STEREO" item, then push [ENTER]. 3,Push [MAIN PAGE] to exit system setting page. 3.Push [MAIN PAGE] to exit system setting.
System setting System setting Example 4: Set age control grade For original DVD disc, parents can prohibit the those content inadvisable to children to be played, you can operate following these procedures to set age control grade: 1.Push [POWER] 2.Push [SETUP] to enable TV screen display system setting menu picture, push [DOWN] till the high lighting band move to the item "PREFERENCE", push [ENTER], then push [DOWN] till the high lighting band move to the item "PARENTAL", TV screen will display: 2.
Functions of buttons in remote control Functions of buttons in remote control 7. Functions of buttons in remote control This chapter will detail the functions and operation procedures of all buttons in the remote control, for users' instant reference. Most operation procedures can be referred to relevant content of chapter 4, 5. 8. 1[ ] When the DVD player is in stop, pause, slow play, fast forward, fast reverse state, you can push [ PLA ] to resume normal playback.
Functions of buttons in remote control Functions of buttons in remote control 8.17 [UP], [DOWN], [LEFT], [RIGHT] When the screen display the menu of DVD disc or system menu, the player is in waiting state, you can push these buttons to move the cursor then select the desired item. 8.18 NUMBER BUTTONS [0], [1].... [9] number buttons are used to enter number, e.g. No. of track, DVD chapter No., time data, etc. 8.
Specifications Technical terms 8. Technical terms TITLE:For DVD disc it is defined as a long complete segment of image or music or a movie. Each title has a number that makes it easy to search. TRACK: The image or music of a VCD or CD. Each track has a number for search. CHAPTER:It is smaller than title among the units of a DVD, it is defined as a long complete segment of image or music or a movie. A title is made up of several chapters, and each chapter has a number for search.
How To Deal With Disk How To Deal With Disk Attention Don't write on the labeled side. Don't use pickup cleaning preparation. phenyl, chemical solution, dispersing solution, antistatic electricity solution or any other kind of solutions to clean disk Don't stick label or gluebased note on disk (Don't use disks with remaining glue or damaged gluey lable) Don't use scratchingpreventing materials or cover, unless it is assignedto use on this machine. How to hold disk Don't touch the face carving information.