User's Manual

Page 17
SVR-250 Service Manual
Menu selections
File
Open: Allows you to load a previously saved file from disk. Enter the file name or select from the Windows Dialog
box. Only files with the .V25 extension can be loaded.
Save: Allows you to save the current configuration to disk. Enter the file name to save as or select a previous file
from the Windows Dialog box to overwrite. The .V25 extension is automatically added to the file name. The
program will prompt you before overwriting an existing file.
Print: Sends the current configuration to the selected printer. Make sure the printer is on line and paper is loaded
before executing this command.
Exit: You will be asked to confirm before exiting the program. The software will also prompt you if the
configuration has changed since program start up and data has not been saved to disk.
Programming
Using the Software
The SVR250CPS personalization software is used to program the SVR-250 for all of the operating parameters
and options. The software is compatible with Windows 2000 and later operating systems The software is menu
driven and on-line help is available at any time by clicking the left mouse button on the HELP icon on the right
side of the tool bar.
Important Note:
Before attempting to program the SVR-250 start the software and ensure the FY-4 programming cable is
plugged into the correct serial port. The com port may be selected under the “Transfer” menu. Plug the FY-4
programming cable into P7 on the front of the SVR-250; the channel indicator should show "PC".