User manual

ManualsBrandsPyramid Time Systems ManualsDomestic Appliances5000+ HD

Bluetooth In-Wall Stereo Amplifier

• Add music to you kitchen, bedroom, bathroom, study

• Powerful true 20W RMS per channel output

• Fits into a standard UK two gang pattress

• Built In FM Radio with ten station memory

• Front jack input

• Rear line level input

• Bluetooth for easy music streaming from phone or tablet

• Front panel control plus Infra Red remote control

• Smooth tactile moisture resistant front panel switches

• LED's for status and confirmation

• Flush mount or surface mount (25mm depth)

New Low Price!

See Page 17

Code GV821 £265.00

Gigavideo 821 Wireless HDMI Sender

• Replace your HDMI cable wirelessly and locate your HDTV or

projector wherever you want

• Mount the receiver (out of sight) behind your HDTV or

on the ceiling next to your projector. No more visible cables

• Watch up to 2 (HD) devices such as Blu-ray® players,

DVRs, HD set-top boxes, game consoles etc, and

easily switch between the sources connected without

changing plugs

• The built-in HDMI splitter means that you can continue

to watch the connected devices locally

• Operate your A/V sources from anywhere, even through

a wall or cupboard door, using the IR receiver

• The HD signal does not experience any delays and is

therefore perfect for game consoles

• Digitally supports all 480p, 720p, 1080i and 1080p

(Full HD) resolutions from up to 30 metres

HDMI 1:2 Distribution

The Coosis 2 way HDMI Distribution

amplifier is a compact device that gives

two simultaneous HDMI outputs from

one HDMI input, ideal for viewing on

multiple displays. The Coosis units can

also be cascaded together in a

“pyramid” network to provide a one-

to-many solution.

Please note: If the max resolutions of

your displays are different, the EDID

functionality will detect all the

connected displays' EDID nformation

and auto-match the output resolution

to the lower one. For example, if one

display supports 720P resolution and

the rests support 1080P, the signal will

be lowered to 720p for all displays.

The quality of an HDMI cable has a

great impact on signal transmission.

For best image quality, we suggest you

use a copper based HDMI cable.

Max. recommended cable length after

amplifier: 10 metres

Package contents:

1 X Coosis 2 way HDMI Distribution

amplifier

1 X Power Supply (+5V DC, 1A)

1 X User Manual

Digital Audio Lip-Sync Corrector

• Absolutley the best most definitive answer to lip sync

problems on the market today!

• 680ms delay (340ms for 96kHz signals)

• On-the-fly adjustment with no image overlay

• Tweaking in 1ms and 1/3ms steps

• 36 preset delays for instant recall

• Discrete input switching, with input's last

delay restored

• Automatic optical-to-coax/coax-to-optical conversion

• 4 digital audio inputs, 2 digital audio outputs

(optical and coax)

New Low Price!

See Page 5

Established in 1988

Trading online since 1996

NEW Products & Special Offers

connections

A small selection from the 5000+ AV products

on www.keene.co.uk

Our best selling

HDMI splitter!

Code HDC12 £34.99

New product!

See Page 2

Code DD740 £169.00

Code KLAB20DB £149.99

Order Now

01332 830550

Monday to Friday 9.00am and 5.00pm

For more new products and bargains visit

www.keene.co.uk

Audio 2-7

AV Switching & Distribution 8-9

Conversion & Distribution 10-11

HDMI Cables 12

CAT5 & Networking Cabling 13

HDMI Solutions 14-19

Power Solutions 20

AV Plates & Panels 21

IR Control Solutions 22-28

IR & AV Cables 29

AV Supports 30

Camera Supports 31

Audio – Microphones 32

D-SLR 34

AV Accessories 36

Summary of content (36 pages)

PAGE 1
connections NEW Products & Special Offers A small selection from the 5000+ AV products on www.keene.co.uk Established in 1988 Trading online since 1996 HDMI 1:2 Distribution Gigavideo 821 Wireless HDMI Sender The Coosis 2 way HDMI Distribution amplifier is a compact device that gives two simultaneous HDMI outputs from one HDMI input, ideal for viewing on multiple displays. The Coosis units can also be cascaded together in a “pyramid” network to provide a oneto-many solution.
PAGE 2
Audio KLAB In-Wall Amplifiers You quite often want to listen to some music in other rooms in your house, such as kitchens, bedrooms bathrooms & studies. The problem usually is space. You can fit flush mount loudspeakers into ceilings and walls without much difficulty but that still leaves the problem of where to put the amplifier. To solve this problem Keene designed the KLAB series of in-wall audio amplifiers built into a standard two gang pattress.
PAGE 3
Audio Architectural Speakers for use in Walls or Ceilings Moisture Resistant Speakers for use in Walls or Ceilings • Pivotal tweeters allow high frequencies to be focussed • Removable mesh grills • Frame allows for ceiling or wall board mount without extra brackets • 8 ohms High quality moisture resistant speakers suitable for PA installations in swimming pools, bathrooms, shower rooms, saunas and tanning rooms etc.
PAGE 4
Audio Wireless Audio Sender Wireless Speakers A Sender/Receiver pair designed to transmit audio wirelessly around your house. Take the line (or headphone) output from your PC, TV or music system and sonnect it the Sender, then connect the line output from the receiver back into the remote amplifer in the room you want to listen in. The sender and receiver will automatically pair so there's nothing to configure. Additional receivers can be added for a oneto-many solution. £51.95 £32.
PAGE 5
Audio Bluetooth Audio Adaptor Digital Audio Lip-Sync Corrector A fantastic gadget, simply pair it with any Bluetooth audio source, plug the output into any device with an auxiliary input and listen to internet radio or the music stored on your smartphone or tablet PC on your audio system (wirelessly). Suitable for all Bluetooth® enabled sound sources such as iPhone, Android phone, iPad, etc. Works with all audio installations, iPhone dock or radio/CD player with aux-in, line-in or mp3-link connection.
PAGE 6
Audio HDMI Audio Embedder with built in Repeater Analogue Audio Lip Sync Corrector Specifications: This analogue stereo Lip Sync Corrector is a small device for delaying audio signal to overcome audio sync issues. The AU-D18 Lip Sync corrector is able to adjust the timing to the display/amplifier so that users may received both video and audio in sync. No more annoying sound mismatch. The Lip SyncCorrector is easy to use with a simple setup and an affordable unit for sound delaying.
PAGE 7
Audio HDMI Audio Extractor HDMI Audio Amplifier The HDMI Audio Extractor is a device that allows you to extract audio signals from your HDMI source. When connecting with a TV or display you dont always get great audio, or in the case of a display, no audio at all, so with this Audio Extractor you can take your original HDMI audio signal and convert it to Digital Toslink or analogue L/R audio.
PAGE 8
AV Switching & Distribution Keene KPDA 1:5 Component Video & Audio Distribution Amplifier • One input, five fully buffered outputs • Wide bandwidth HDTV capable • Broadcast quality high speed video buffers • Use for component video, RGBs video, RGsB video or four x composite video plus stereo audio • One video channel may be used for digital audio The KPDA is a high quality audio/video distribution amplifier, allowing one video and audio source to simultaneously supply up to five other devices.
PAGE 9
AV Switching & Distribution HDMI Distribution Amplifiers HDMI Distribution Amplifiers Each product in the Quantum Distribution Amp Series is compatible to V1.3 specifications. Besides splitting and distributing, this HDMI V1.3 Distribution Amplifier also does signal amplification and equalization, so as to provide high performance for both audio and video.
PAGE 10
RGB Conversion & Distribution VGA in to HDMI Out Keene RGB2C RGB/Component video transcoder Composite / s-video to Component or RGB Another in-house product from Keene Electronics, the RGB2C can convert an RGB input to a component (Y Pb Pr) output, and vice versa. It can cater for sync on green or composite sync input and also provide sync on green or composite sync output. LED indicators provide useful information on the type of signals present and which process is being performed.
PAGE 11
RGB Conversion & Distribution RGB SCART & S-video to HDMI 1080p HD Convertor HD UltraBridge This device contains a high quality chipset to convert analogue Scart AV signals (RGB or composite, or s-video and upscale them to a choice of HDMI resolutions, 720p, 1080p, 1680x1050, 1360x768 and a choice of screen modes (16:9, 16:10, expand & subtitle). Control is by front panel or supplied IR remote. Great for connecting legacy equipment to an HDMI switchbox and for simplifying your connections.
PAGE 12
HDMI Cables Aavara High Definition HDMI Cables These are top specification Hi-Definition AV Cables fully supporting all of the latest HDMI specifications, including: 3D, 4K, ARC (Audio Return Channel), HEC (HDMI Ethernet Channel). The construction features pure gold 24K plated end shell and connector with a protective braided cable sheath.
PAGE 13
CAT5 & Networking Cabling UTP CAT5E Cable Coosis Python HDMI Cables HDMI Outlet Plates The Coosis Python series of HDMI cables are ultimate High-Speed with Ethernet cables (Cat 2) for HD signal transmission. Upto 15.8G bandwidth permits a lossless transmision of uncompressed 4K × 2K high definition pictures with maximum 48bit/px colour depth.
PAGE 14
HDMI Switchboxes CONNECT 420 5:1 HDMI Switch 3D AAVARA 4:1 Switchbox • Only one cable to your TV screen! Switch between the HDMI devices connected • Suitable for connecting 5 HDMI sources to your TV simultaneously.
PAGE 15
HDMI Matrix Switchers 4X1 COMPOSITE OR S-VIDEO & AUDIO SWITCH Aavara PM4X2 1080p HDMI 1.3b MATRIX 4X2 MX-3141 series 4x1 Routing Switchers are extremely wide bandwidth, high performance products that meet the most demanding requirements for signal routing. Video as well as Audio are routed. Video Bandwidth is flat +/- 3db to beyond 300MHz ensuring these switchers will provide an output identical to the source signals. The Aavara PM4X2 1080p HDMI 1.
PAGE 16
HDMI Over Long Distances HDMI over IP Network HDMI Analyser As well as HDMI over (dedicated) Cat5 cable we can now offer transmitter / receiver systems that will send HDMI signals via an IP computer network. Amazingly they place very little load on your network bandwidth and operate as a true multicast - that is to say one transmitter can drive multiple receivers with no extra network load! They really are extremely simple to operate, just plug and play with no in-depth networking capability required.
PAGE 17
HDMI Over Long Distances HDMI over CAT5 These products make a very affordable method of sending HDMI over long distances whilst preserving the full HD capability. The transmitter converts the HDMI signal into a balanced differential signal and the receiver converts it back into a conventional HDMI signal again. It uses two runs of CAT5E (or CAT6) cable and allows for full auto-adjustment of feedback and equalisation with no user-intervention required.
PAGE 18
HDMI Over Long Distances HDBaseT HDMI extender System This is quite a product! The Aavara PE3D4K100A is a another fantastic tool for installers. Using just a single wire it can be easily retrofitted within an existing network. HDBaseT technology allows this system to send HDMI further and at higher quality than all other conventional HDMI over CAT5 solutions. With no compression and no loss of quality you can get crystal clear 3D 1080P with 7.
PAGE 19
HDMI Over Long Distances HDMI over CAT5/E Extender The CYP PU1106 HDMI over CAT6 Extender Set with IR Pass-through is the perfect solution to extend HDMI signals via CAT cabling up to 40m. The PU-1106 also allows you to use your existing Remote Control to control your device with the included IR Receiver & Blaster. Features: • v1.3 HDMI, HDCP 1.1 and DVI 1.1 compliant. HDMI FAQ • HDMI over CAT6 Extender Set. • Resolutions supported: PC - VGA to WXGA; HDTV - 480i to 1080p plus 1080p24fps.
PAGE 20
Power Solutions Internet Controllable Mains Switch New from Keene, the IPMSW1 is an IP controllable mains power switch. It has two independent mains outlets that can be controlled in a number of ways. What is X10? Features: • Simple browser button based on / off control. • Full browser based set-up and timer configuration. • Adjustable power fail re-start options allow each switch to delay up to 255 seconds before switching on. Ideal for remote re-start of systems that require 2 stage start ups.
PAGE 21
AV Plates & Panels Scart outlet plates 15pin HD outlet plates 19" AV Rack Panels Scart outlet plate which fits a standard UK single pattress and provides a scart socket. The rear of the sockets have solder type connections. Standard size white wall single outlet plate with a 15pin HD female connector. The rear of the plate also has a 15pin female socket making it easy to connect to premade 15pin HD cables. Rugged 19 inch AV patch panels powder coated black.
PAGE 22
IR Distribution Systems IRBKIT IR Signals Explained I think we are all aware that infrared is just light that we cannot normally see. It is light at the low (red) end of the visible spectrum, and shares many of the properties of visible light. Like visible light infrared travels in straight lines and will not go around a corner unless there is something about that will reflect it or refract it. Also like visible light it is reflected by white surfaces and usually absorbed by dark surfaces.
PAGE 23
IR Distribution Systems IRBKIT MINI The Keene IRBKIT MINI is a very compact IR Distribution Amplifier. It allows you to use your remote control on equipment located in positions where your remote wouldn’t normally work. For example, equipment placed inside cabinets with closing doors or located on shelves behind you or around a corner. Because of the compact size and light weight the IRBKIT mini can also be attached to the rear of a wall mounted display, ideal for use with items such as Apple TV®.
PAGE 24
IR Distribution IR Universal Wand The Universal wand is ideal for most applications and can be mounted directly onto the equipment fascia or placed on the shelf in front. Dimensions of emitter: L 21mm x W 19mm x D 7mm. Fitted with a 1.2 metre cable. Keene IR Receiver Adaptor KRECA Fascia Mount IR Receiver This device allows Keene IR receivers to be used with other manufacturers IR distribution systems, for example Xantech, Onkyo, Harmon Kardon etc.
PAGE 25
IR Anywhere / Matrix SKY Digital Remote Control Link Magic Eye Sky digital satellite systems have two RF aerial outputs. The 2nd RF output can be run to a remote television (typically a bedroom or kitchen) to allow you to view Sky. Once you’ve done this you can then easily control the digibox from your second TV by adding a magic eye; simply connect it in-line with the aerial by the remote TV, place the remote “eye” on top of the TV and you now have infra-red control of your digibox from the remote TV.
PAGE 26
IR Anywhere / Powermind Infra Red over an IP Network, What! Why? Keene have designed a range of products that are capable of sending and receiving IR signals across an IP network. This can be across a LAN, say from one room or office to another or even one from one side of the world to the other via the internet. There are several ways to make use of this technology.
PAGE 27
IP Control KIRA RS232 For extended integration options the KIRA RS232 provides IP control for both Infra Red and RS232 signals. This model has no option for an external IR receiver although its still has an on-board IR receiver should you need it. In addition to the ability to send stored IR codes when triggered by IP commands it will also send stored IR codes when triggered by Keene defined ASCII commands via RS232.
PAGE 28
IR Distribution POWERMID KIT DEALS Devices that give you wireless control of your AV devices from another room This is a Powermid XL kit that includes one extra IR receiver so you can control your equipment from two different rooms. POWERMID The Powermid remote extender system allows remote control of IR operated equipment from anywhere in the house. It comprises a pair of small pyramid shaped devices.
PAGE 29
IR & AV Cables IR Link Cables CAT5 Cable Economisers For direct connection of the IR Wand output to the IR receiver input on a Keene IR Distribution Amplifier. Although CAT5 cables have four pairs of conductors, 10base and 100base systems only use two of these pairs so half of the cable is redundant. These cable economisers allow you to route two IP signals down a single Cat5 cable.
PAGE 30
AV Supports Centre Speaker Mount Centre Speaker Wall Mount with Adjustable Arms Designed for loudspeakers up to 15kg (33lbs) • Ideal for centre channel speakers, DVD players and other AV equipment • Allows speaker to be positioned for optimum esoteric performance • Easy adjustment of arm depth • Simple installation with all mounting hardware included Specifications • Maximum Weight: 15kg (33lbs) Code BT15 (black) £12.
PAGE 31
Camera Suppports LIBEC TH-650 Tripod & Head TPV1 Video Tripod Tracking Dolly with Track An extremely high quality tripod at a great price, the fluid head has a counterbalanced mechanism which compensates for the camcorders weight and holds it steady at any tilt angle. The head also has a 65mm claw ball which allows for quick and easy head levelling regardless of leg position.
PAGE 32
Audio Rode Podcaster Broadcast USB Microphone Seamless integration was the idea, and it was obtained by creating a studio dynamic microphone with unparalleled A/D convertors, so that the microphone can be plugged into any computer with no in/out boxes, no expensive computer pre-amps, just a USB cable. The Podcaster offers an end-address configuration, the clarity of RODE’s tailored-for-voice frequency response, an ‘ON’ L.E.D, a direct headphone amp, and of course very low self noise.
PAGE 33
Audio – Microphones Rode VideoMic Microphone Rode NGT1 & NTG2 Shotgun Rode Boom Poles The RODE VideoMic exhibits low noise and an unusually wide bandwidth for its size. It is ultra lightweight and incorporates a shock mount to isolate camera body noise. Its powered by a standard 9V PP3 type battery and complete with a low battery LED indicator and a switchable high pass filter to reduce unwanted low frequency rumble. It has a standard hot-shoe mount and can also be attached to a boom arm or tripod.
PAGE 34
D-SLR LCD Viewfinder for DSLR HD Video The SEAGULL DSLR-LCD FINDER is an essential tool for any serious film maker. Without it, that grouping of a small LCD screen, manual focus, razor thin shallow depth-of-field, camera shake, sunlight and glare makes shooting a video an hit-and miss affair...........with it, the control is all yours! The DSLR LCD Viewfinder is a great accessory for anyone using a DSLR to shoot video. It solves the 3 major problems: 1.
PAGE 35
D-SLR D-SLR Shoulder Rig Black Widow Spider Black Widow Belt This is a lightweight compact rig ideal for DSLR's and camcorders. It has a gadget bag friendly size when folded and extends out to provide a variety of different support options. Spider Holster for lightweight DSLRs and point-andshoot cameras. Don’t get us wrong, the Spider Holster Black Widow is designed to be very comfortable when worn on your own belt.
PAGE 36
A small selection from the AV accessories on www.keene.co.uk Internet Controllable Mains Switch Digital TV Anywhere New from Keene, the IPMSW1 is an IP controllable mains power switch. It has two independent mains outlets that can be controlled in a number of ways. Digital wireless sender for all your Digital TV Channels.