User manual

Email your order to us at [e-mail]
16
HDMI Over Long Distances
HDMI over IP Network
As well as HDMI over (dedicated) Cat5 cable we can now
offer transmitter / receiver systems that will send HDMI
signals via an IP computer network. Amazingly they place
very little load on your network bandwidth and operate as a
true multicast - that is to say one transmitter can drive
multiple receivers with no extra network load! They really
are extremely simple to operate, just plug and play with no
in-depth networking capability required. They also provide
full IR feedback allowing remote control of source
equipment. A flexible, scalable, low cost solution to
distributing HD signals to multiple displays. They can be
used in Extender Mode (connect the Sender to the Receiver
by CAT5e/6/7 cable directly) or Broadcaster
Mode (Sender to Receiver via LAN) for one Sender to
many Receivers.
PB5000P
Features:
• 1080p Ultra High Quality Video transmission and up to
16 Groups Multi-Casting
• Flexible and scalable HDMI 1080p broadcasting with
Gigabit Ethernet LAN
• 1 to 1, 1 to many & multi-casting broadcasting
architecture, adding more displays without adding
LAN bandwidth loading
• Multi-Casting group with Gigabit Ethernet managed
switch (required 802.11Q VLAN & IGMP function)
support, up to 16 multi-casting group support
• 16 sets C class IP Dip switch configuration on both Sender
& Receiver for easy Multi-Casting group matching
Specifications:
• Video Resolution:480i/p, 576i/p, 720p, 1080i/p
• Sender Connector:Power Adapter in, RJ45,
RS232, IR Emitter Connector, HDMI
• Receiver Connector:Power Adapter in, RJ45,
RS232, IR Receiver Connector, HDMI out
• HDMI Spec.:1.3 Compatible
• DVI Spec.:1.0 Compliant
• HDCP Spec.:1.2 Compliant
• Link Connector:RJ45
• Power Consumption:3.2W
• Audio System:Stereo L/R
• Audio Resolution:16bit 48Khz
• max CAT5 Cable Length:100M
• Power Adapter:DC 5V/2A
Code PB5000P Sender/Receiver pair £524.54
Code PB5000PR Additional receiver £394.62
PB5000P
The newly updated PB5000Plus units now provide IR feedback and RS232 control
and deliver stunning Ultra High Quality 1080p HDMI Video broadcast over IP network.
Via an inexpensive Gigabit Ethernet network switch the PB5000P can support Point to Point, Point to
Many Broadcasting, and Multi-Casting which multiple video sources with PB5000+ Senders video streaming to multiple TVs/
Displays/Projectors with PB5000+ Receiver. Multi-casting can be done by Managed Gigabit Switch with 802.1Q VLAN
function which provide control remotely and allows more video source/senders to be integrated.
PB5000P
• IR Pass-Thru on 1 to 1 extender configuration
• Up to 16 Groups Multi-Casting
• IR Control Pass Thru
• Two Way RS-232 Command Unicast Broadcast for
control from remote site
• Easy Dip Switch Matching for Multi-Casting
Group configuration
• New EDID Copy/Video Mode Switching Button for
Optimal Video Performance
• Video Wall function support for up to 8x16 displays
by Easy Web Interface Configuration
• Optional PoE support upon request
Yet another really useful way to get HDMI from one place
to another, the PCE122 can send ultra high quality HDMI
v1.3 over a single coaxial cable! (RG6 or RG59). It can
send full HD 1080P up to 120M or 720P up to 230M,
both with full 7.1 channel audio. The conversion is fully
digital (HDMI to SDI and back again) with no additional
compression and gives you crystal clear HD at long
distances. The PCE122 also contains a built-in 1 to 2
Coaxial Splitter to drive two separate receivers and each
receiver has a loop-through
to daisy chain
additional receivers as
required. Cables are
connected via BNC for
a secure, vibration
resistant connection.
Specifications:
• 120M HDMI 1080p video and 7.1channel audio one
cable transmission with Ultra High Quality Video
• Features World Leading Single Coaxial Transmission,
designed to simplify Installation
• 1080p 120M / 720p 230M long distance Ultra
High Quality Video with 7.1 channels surround
sound transmission
• Up to 7.1 channels audio, Dolby® Digital / Dolby®
TruHD/DTS®-HD pass-thru
• Built-in 1 to 2 Coaxial Splitter in Sender and One
Coaxial Cascade output in Receiver for great extension
flexibility
• Support 5 layers Cascadable for up to 600M 1080p
video transmission and up to 10 TVs/Displays/
Projectors connected
• BNC connector designed for solid coaxial connection
• HDMI v1.3b, HDCP Compliant
• Hassle free plug-n-play, install in seconds
PCE122 with IR feedback:
Code PCE122IR (transmitter & receiver pair with IR) £542.61
Code PCE122RIR (additional receiver with IR) £315.70
HDMI over Single Coaxial Extender
Code XA1 £306.44
HDMI Analyser
The XA-1 is the perfect analysis tool for AV installers and
integrators. This device allows the user to analyse AV
sources for resolution and EDID information whilst also
providing pattern generation and test functions for
identifying display capabilities. This small but advanced
HDMI analyser also supports the analysis and pattern
generation of 3D signals. This allows the user to check
compatibility between sources and displays and provides a
means of identifying system problems for troubleshooting.
Features:
• Supports v1.4 HDMI Audio Return Channel
(ARC) function
• Support timings include SD, HD up to 1080p, PC up to
WUXGA and 3D
• Analyse input source info-frame and output sink EDID
• Deep color video support up to 12-bits
• HD resolutions supported - 480i to 1080p + 1080p24fps
• PC resolutions supported - VGA to SXGA + WUXGA
• 3D modes supported - Frame Packing (720p@50/60,
1080p@24); Side-by-Side (half)(1080p@24/60,
720p@50/60); Top-and-Bottom (1080p@24/60,
720p@50/60)
• Provides 25 timings and 6 patterns
• OLED show Input / Output timing information
• Support input signal bypass, digital video formats in
Deep Color Mode at up to 36 bits (12bits/color) and new
lossless compressed (Dolby TrueHD, Dolby Digital Plus
and DTS-HD master Audio)
digital audio
• Supports internal
pattern audio LPCM 2CH
48/96/192KHz, LPCM5.1
48/96 kHz, LPCM7.1
48/96KHz
HDMI over CAT5E/5 Extender
One of the Professional series of HDMI Cat5 3D Extenders.
The PE121L features 3D, IR and HDMI Ethernet Channel
Pass-Thru, all via twin CAT5E cable. Fully compatible with
Blu-Ray 3D and featuring IR pass-through this is a great
problem solver and it’s compact size makes it very
unobtrusive.
Features:
• Uncompressed 1080p HDMI over Cat5e/6/7
• Local HDMI output on Sender unit
• Full range IR Pass-Thru (receiver & emitter included)
• CEC Pass-thru allows one remote control to sync TV and
AV devices
• Support HDMI v1.4 3D video format Blu-Ray player
and 3D TV
• Support v1.4 HDMI Ethernet Channel
Specifications:
• HDMI Spec: v1.4 Compliant
• DVI Spec: v1.0 Compliant
• HDCP Spec: v1.2 Compliant
• Video Format: Up to 1080p 3D Uncompressed Video
• Audio Format: Up to 7.1 Channel, DTS HD Master Audio/
Dolby TrueHD
• HDMI Source Input Port: 1 Port
• HDMI Display Output Port: 1 Port
• LINK Connector: RJ-45 Shielded x2
• HDMI Ethernet Channel: Pass-Thru Supported
Code PE121L £154.99