User manual

Email your order to us at [e-mail]
34
D-SLR
LCD Viewfinder for DSLR HD
Video
The DSLR LCD Viewfinder is a great accessory for
anyone using a DSLR to shoot video. It solves the 3
major problems:
1. The necessity to view images continuously on the
LCD screen which, in turn, effects stability and thus
focus where the camera has to be handheld away
from the body.
2. The inability to actually ‘see’ any image on that same
screen when working in any bright lighting
conditions.
3. Trying to ascertain the depth-of-field, even if you can
discern that image.
The DSLR-LCD Viewfinder solves these problems by
providing a finder that gives you a nice, large 3-inch LCD
image to work with, and then adds a 3x magnification for
extra clarity. What’s more, it features quality optics
consisting of three elements arranged in 3 groups.
Clipping onto the rear of your DSLR finder it provides the
perfect environment for comfortable viewing
incorporating, as it does, a soft motion-picture type
moulded eyecup to block out extraneous light - thus
letting you view a perfect image. It also offers an
excellent range of continuous dioptre variations
between + 4 and -4 to accommodate glass wearers.
The combination of these features allows you to bring
the camera in close to your body for increased stability
and secure viewing and filming.
The SEAGULL DSLR-LCD FINDER is an essential tool for
any serious film maker. Without it, that grouping of a
small LCD screen, manual focus, razor thin shallow
depth-of-field, camera shake, sunlight and glare makes
shooting a video an hit-and miss affair...........with it,
the control is all yours!
Specifications:
Magnification - 3x
Optic Glass - 3E3G
Dimensions – 84.5 x 70 x 77mm
Diopter - +/-4
Will fit LCD Size up to 3 inch
Comes complete with hand strap
Code LCDVF £74.99
LED Light Ring and Flash unit
New from Seagull, a compact and nicely made LED
light ring with flash function. The power pack and
control unit fits onto the hot-shoe on top of your DSLR
whilst the LED light ring is mounted around the lens via
an adaptor ring screwed direct into the camera's filter
thread.
The control unit has a three position slider switch on
the back for off, light (only) on, and light plus flash on.
The brightness is controllable via a rotating wheel and
so you can tailor your light output to your situation.
The flash function is four times brighter than the
output of the constant light to give you plenty of
oomph for the shot. There is also a test button so you
can experiment before shooting begins.
It comes complete with six adaptor rings to fit it to 52,
55, 58, 62, 67 and 72mm camera threads, and it can
be adapted easily to other sizes by using additional
stepping rings (please just give us a call as we can
supply most sizes from stock at reasonable prices).
Specifications:
LED light: Power output 5w
Colour temperature: 5800k
Brightness: 480 lumens
Flash Index: 8.5ft. (ISO100, 1/60s)
Powered by 4pcs. AA batteries (not included)
Code MRC80 £79.99
LED Light Panels
LED126T
The light head carries 126 super-bright LED bulbs to
give plenty of illumination. These are controled by the
on-board on / off slider switch and a rotary dimmer
gives you control over the amount of light to be used.
Rather than use the traditional choice of AA or AAA
batteries, the LED126T uses a Sony type lithium-ion
camcorder battery with a hefty 4600mAh capacity
(included) to give plenty of shooting time.
Included in the package is a mains charger for the
battery pack with a choice of three plug adaptors (UK,
Euro, US) so that it can be used in many countries
throughout the world.
Two filters are also included with the light, a frossed
diffusser, and a yellow 'warm' filter. These simply slot
into place on the front.
The LED126T can be either stand or camera mounted
and comes complete with a standard sized cold-shoe
adaptor with locking thumb wheel (this also has a 1/4"
tripod thread in it's base), and a mini-shoe adaptor to
enable the light to be used on the Sony / Canon
cameras with the smaller sized shoe fitting..
Code LED126T £99.99
LED256T
Also available, a 256 LED version.
Light including battery
Weight: 486gms
Dimensions: 29 x 9 x Depth 3 ins.
Code LED256T £129.99
PROFESSIONAL D-SLR TWIN
BATTERY CHARGER
The Hanel ProCube is a high quality metal bodied
charger for use with Canon (E6) and Nikon (EL14/EL15)
batteries. It will also charge 4 x AA batteries and
provides a high current USB charge outlet making it the
ideal one-charger-does-all companion for pro
photographers on the move. Supplied with UK/Euro/US
mains plugs and as well as a 12v car cigar lead
Features:
* Charges 1 or 2 DSLR batteries simultaneously
* Intelligent fast IC charge control with LCD Display
* Integrated 2.1A USB charger.
* Detects & charges most USB devices (iPad & iPhone /
Samsung Note / Tab / all Samsung Smartphones)*
* Includes an AA battery tray for charging of an
additional 4 x AA
* Supplied with interchangeable UK, Euro and US plugs
* 12V Car Lead included
Compatible with the Canon E6 & HL-E6 / E8 & HL-E8
series and the Nikon EL14 & HL-EL14 / EL15 & HL-EL15
series batteries.
Code PROCUBE £57.88
Black Magic Intensity Pro
Working in HDTV is exciting, however HDV's heavy
compression and limited 1440 x 1080 resolution can
cause problems with video quality and editing. Intensity
Pro eliminates these problems by using direct capture
from the camera image sensor at full 1920 x 1080
HDTV resolution and uncompressed video quality.
Both HDMI and Analogue Connections
Intensity Pro enables you to capture directly from the
HD cameras CCD, bypassing the video compression chip
for true uncompressed video quality. Featuring both
HDMI and analogue video connections means Intensity
Pro works with a massive range of cameras, televisions
and video projectors.
Code BINTSPRO £148.15